摘要:
Modulated signal A is transmitted from a first antenna, and modulated signal B is transmitted from a second antenna. As modulated signal B, modulated symbols S2(i) and S2(i+1) obtained from different data are transmitted at time i and time i+1 respectively. In contrast, as modulated signal A, modulated symbols S1(i) and S1(i)′ obtained by changing the signal point arrangement of the same data are transmitted at time i and time i+1 respectively. As a result the reception quality can be changed intentionally at time i and time i+1, and therefore using the demodulation result of modulated signal A of a time when the reception quality is good enables both modulated signals A and B to be demodulated with good error rate performances.
摘要:
In a multi-antenna communication system using LDPC codes, a simple method is used to effectively improve the received quality by performing a retransmittal of less data without restricting applicable LDPC codes. In a case of a non-retransmittal, a multi-antenna transmitting apparatus transmits, from two antennas, LDPC encoded data formed by LDPC encoding blocks. In a case of a retransmittal, the multi-antenna transmitting apparatus uses a transmission method, in which the diversity gain is higher than in the previous transmission, to transmit only a part of the LDPC encoded data as previously transmitted. For example, the only the part of the LDPC encoded data to be re-transmitted is transmitted from the single antenna.
摘要:
Modulated signal A is transmitted from a first antenna, and modulated signal B is transmitted from a second antenna. As modulated signal B, modulated symbols S2(i) and S2(i+1) obtained from different data are transmitted at time i and time i+1 respectively. In contrast, as modulated signal A, modulated symbols S1(i) and S1(i)′ obtained by changing the signal point arrangement of the same data are transmitted at time i and time i+1 respectively. As a result the reception quality can be changed intentionally at time i and time i+1, and therefore using the demodulation result of modulated signal A of a time when the reception quality is good enables both modulated signals A and B to be demodulated with good error rate performances.
摘要:
In a multi-antenna communication system using LDPC codes, a simple method is used to effectively improve the received quality by performing a retransmittal of less data without restricting applicable LDPC codes. In a case of a non-retransmittal, a multi-antenna transmitting apparatus transmits, from two antennas, LDPC encoded data formed by LDPC encoding blocks. In a case of a retransmittal, the multi-antenna transmitting apparatus uses a transmission method, in which the diversity gain is higher than in the previous transmission, to transmit only a part of the LDPC encoded data as previously transmitted. For example, the only the part of the LDPC encoded data to be re-transmitted is transmitted from the single antenna.
摘要:
A transmitter apparatus wherein a relatively simple structure is used to suppress burst errors without changing the block sizes of encoded blocks even when the number of modulation multi-values is increased. An encoding part subjects transport data to a block encoding process to form block encoded data. A modulating part modulates the block encoded data to form data symbols; and an arranging (interleaving) part arranges (interleaves) the block encoded data in such a manner that the intra-block encoded data of the encoded blocks, which include their respective single different data symbol, get together, and then supplies the arranged (interleaved) block encoded data to the modulating part. In this way, there can be provided a transmitter apparatus wherein a relatively simple structure is used to suppress burst errors without changing the block sizes of encoded blocks even when the number of modulation multi-values is increased.
摘要:
In a multi-antenna communication system using LDPC codes, a simple method is used to effectively improve the received quality by performing a retransmittal of less data without restricting applicable LDPC codes. In a case of a non-retransmittal, a multi-antenna transmitting apparatus transmits, from two antennas, LDPC encoded data formed by LDPC encoding blocks. In a case of a retransmittal, the multi-antenna transmitting apparatus uses a transmission method, in which the diversity gain is higher than in the previous transmission, to transmit only a part of the LDPC encoded data as previously transmitted. For example, the only the part of the LDPC encoded data to be re-transmitted is transmitted from the single antenna.
摘要:
A transmitter apparatus wherein a simple structure is used to successfully suppress the degradation of error rate performance that otherwise would be caused by fading or the like. There are included encoding parts that encode transport data; a mapping part that performs such a mapping that encoded data sequentially formed by the encoding parts are not successively included in the same symbol, thereby forming data symbols; and a symbol interleaver that interleaves the data symbols. In this way, a low computational complexity can be used to perform an interleaving process equivalent to a bit interleaving process to effectively improve the reception quality at a receiving end.
摘要:
In a multi-antenna communication system using LDPC codes, a simple method is used to effectively improve the received quality by performing a retransmittal of less data without restricting applicable LDPC codes. In a case of a non-retransmittal, a multi-antenna transmitting apparatus transmits, from two antennas, LDPC encoded data formed by LDPC encoding blocks. In a case of a retransmittal, the multi-antenna transmitting apparatus uses a transmission method, in which the diversity gain is higher than in the previous transmission, to transmit only a part of the LDPC encoded data as previously transmitted. For example, the only the part of the LDPC encoded data to be re-transmitted is transmitted from the single antenna.
摘要:
Modulated signal A is transmitted from a first antenna, and modulated signal B is transmitted from a second antenna. As modulated signal B, modulated symbols S2(i) and S2(i+1) obtained from different data are transmitted at time i and time i+1 respectively. In contrast, as modulated signal A, modulated symbols S1(i) and S1(i)′ obtained by changing the signal point arrangement of the same data are transmitted at time i and time i+1 respectively. As a result the reception quality can be changed intentionally at time i and time i+1, and therefore using the demodulation result of modulated signal A of a time when the reception quality is good enables both modulated signals A and B to be demodulated with good error rate performances.
摘要:
Modulated signal A is transmitted from a first antenna, and modulated signal B is transmitted from a second antenna. As modulated signal B, modulated symbols S2(i) and S2(i+1) obtained from different data are transmitted at time i and time i+1 respectively. In contrast, as modulated signal A, modulated symbols S1(i) and S1(i)′ obtained by changing the signal point arrangement of the same data are transmitted at time i and time i+1 respectively. As a result the reception quality can be changed intentionally at time i and time i+1, and therefore using the demodulation result of modulated signal A of a time when the reception quality is good enables both modulated signals A and B to be demodulated with good error rate performances.