摘要:
An average power indicating channel characteristics is outputted from a reference value calculation unit as a reference value. An interference level corresponding to the degree of influence by frequency selective interference is outputted from an interference detection unit. A reliability determination unit determines a carrier that has been subjected to interference on the basis of the reference value and the interference level, to decide a reliability level. An error correction unit performs error correction of a demodulation signal on the basis of the reliability level.
摘要:
There is provided a signal demodulating device, including: a time frequency converting unit (6) for converting a frequency division multiplexing signal on a time axis into a signal on a frequency axis to output a data carrier, a pilot carrier, and a transmission control carrier; an equalizer (7) for equalizing the data carrier and the transmission control carrier according to a characteristic value of a transmission line obtained from the pilot carrier to output an equalized data carrier and an equalized transmission control carrier; a first decoding unit (9) for decoding the equalized transmission control carrier; and a first correcting unit (10) for performing first error-correction on an output of said first decoding unit (9) to output first control information and a first decoding flag that indicates a status of the first error-correction.
摘要:
An average power indicating channel characteristics is outputted from a reference value calculation unit as a reference value. An interference level corresponding to the degree of influence by frequency selective interference is outputted from an interference detection unit. A reliability determination unit determines a carrier that has been subjected to interference on the basis of the reference value and the interference level, to decide a reliability level. An error correction unit performs error correction of a demodulation signal on the basis of the reliability level.
摘要:
An average power indicating channel characteristics is outputted from a reference value calculation unit as a reference value. An interference level corresponding to the degree of influence by frequency selective interference is outputted from an interference detection unit. A reliability determination unit determines a carrier that has been subjected to interference on the basis of the reference value and the interference level, to decide a reliability level. An error correction unit performs error correction of a demodulation signal on the basis of the reliability level.
摘要:
A reception apparatus for receiving an OFDM signal having a plurality of pilot carriers that transmit predetermined pilot signals at predetermined symbols. The reception apparatus transforms the received OFDM signal to a frequency-domain OFDM signal, determines channel responses corresponding to the transmitted pilot signals for each of the pilot carriers among a plurality of carriers constituting the frequency-domain OFDM signal, determines, based on channel responses corresponding to first, second and third pilot signals transmitted sequentially in a same carrier, a channel response at a symbol between the second pilot signal and the third pilot signal, compensates a waveform distortion in the frequency-domain OFDM signal according to the channel response at the symbol between the second pilot signal and the third pilot signal and outputs the results.
摘要:
A reception apparatus for receiving an OFDM signal having a plurality of pilot carriers that transmit predetermined pilot signals at predetermined symbols. The reception apparatus transforms the received OFDM signal to a frequency-domain OFDM signal, determines channel responses corresponding to the transmitted pilot signals for each of the pilot carriers among a plurality of carriers constituting the frequency-domain OFDM signal, determines, based on channel responses corresponding to first, second and third pilot signals transmitted sequentially in a same carrier, a channel response at a symbol between the second pilot signal and the third pilot signal, compensates a waveform distortion in the frequency-domain OFDM signal according to the channel response at the symbol between the second pilot signal and the third pilot signal and outputs the results.
摘要:
In a hydraulic controller of driving force distribution device, including: a hydraulic circuit composed of an oil pump for supplying hydraulic fluid to a piston chamber of a clutch (or a driving force distribution device), an opening and closing valve installed in an oil passage between a check valve and the piston chamber, and an accumulator communicating to the piston chamber; control is performed so that the piston chamber reaches a target hydraulic pressure based on the 1st characteristic by closing the opening and closing valve and driving the oil pump at the time of pressurizing the piston chamber; and control is performed so that the piston chamber reaches a target hydraulic pressure based on the 2nd characteristic by prohibiting the driving of the oil pump along with opening the opening and closing valve.
摘要:
A transmission method of a digital broadcast, which is compatible with a DVB-T terrestrial digital broadcast system in Europe, saves a battery in a mobile terminal. Superframes in DVB-T are divided into units each including plural symbols so that an integer number of TS packets can be carried in each slot. At least one slot is used to transmit one service. Energy dispersion, Reed-Solomon coding, byte interleaving, convolutional coding, and time interleaving are applied to each service. When services for mobile terminal reception and services for fixed terminals are transmitted as the provided services, null packets may be transmitted before and after the slot carrying the mobile receiver service so that the fixed reception service and the mobile reception services are not mixed.
摘要:
A control device for a power transmitting device for four-wheel drive hybrid-vehicle is provided capable of preventing the occurrence of negative torque resulting from power generation control of a second electric motor MG2. Drive-force control executes a control such that rear-wheel output torque Tpr of rear wheels falls in a positive torque when first and second electric motors MG1 and MG2execute power generation controls, thereby preventing torques of front and rear wheels from orienting in different directions. Accordingly, the front and rear wheels have torques oriented in the same direction, thereby favorably preventing discomfort feeling during a vehicle running.
摘要:
A channel characteristic calculation unit 23 estimates channel characteristics based on SP signals included in received signals, and a symbol interpolation filter 24 frequency-shifts frequency transfer characteristics and filters output signals of the channel characteristic calculation unit 23. A filter control unit 27 estimates channel characteristics based on CP signals included in the received signals and observes the estimated channel characteristics to determine a shift amount by which the symbol interpolation filter 24 frequency-shifts the frequency transfer characteristics. The symbol interpolation filter 24 frequency-shifts the frequency transfer characteristics based on the shift amount determined by the filter control unit 27.