Abstract:
A method for data buffer memory management of an electronic device in a wireless network including storing, by processing circuitry, application data in an Application Processor (AP) buffer memory of the electronic device, determining, by the processing circuitry, a fraction of the application data from among the application data stored at the AP buffer memory based on at least one of a data rate capability of the electronic device, a data acknowledgment time or a tolerance time, and storing, by the processing circuitry, the fraction of the application data in a Communication Processor (CP) buffer memory of the electronic device for performing advanced Protocol Data Unit (PDU) formation (APF).
Abstract:
A method for managing an extended Discontinuous Reception (eDRX) in a User Equipment (UE) including determining, by the UE, as to whether an eDRX enablement avoidance criterion is met, and causing, by the UE, to stop sending a request message, which is configured to enable the eDRX, to a network entity when the eDRX enablement avoidance criterion is met. The eDRX enablement avoidance criterion may include one of a data transmission pattern, a historic eDRX usage pattern, whether a configurable retry timer is deactivated, whether a number attempts made to enable the eDRX exceeds a threshold, whether a number of attempts made to enable and disable the eDRX exceeds a threshold, whether a request accept message including an indication that eDRX is not supported, is received from the network entity, or whether an indication of no eDRX support is received from the network entity may be provided.
Abstract:
A method implemented by a processor included in a mobile terminal which is configured to communicate with a communication network, including receiving from a network a first location identifier value in broadcast system information, detecting at least one mismatch between the first location identifier value and a second location identifier value, the second location identifier value included in a location update accept message received from the network, incrementing a value of a counter based on the detected at least one mismatch, determining that the value of the counter reaches a threshold, the threshold being a maximum number of the detected at least one mismatch between the first location identifier value and the second location identifier value, and updating the first location identifier value in a Subscriber Identity Module (SIM) may be provided.
Abstract:
A method of reducing delay in Circuit Switched FallBack (CSFB) in a Radio Access Technology (RAT) communications network. The method includes initiating, by a terminal, a combined attach procedure by sending an attach request message to the RAT communications network, receiving, by the terminal, an attach accept message along with Location Area Identification (LAI) information from the network in response to the attach request message, checking, by the terminal, network identifier information in a RAT information table based on the received LAI, and selecting a mobile network based on the network identifier information to trigger establishment of a circuit-switched call.
Abstract:
Embodiment herein achieves a method implemented in a mobile terminal. The method includes receiving a message from an entity in a network. Further, the method includes determining that a congestion timer T3246 is running, and performing one of stopping the timer T3246 and continuing the timer T3246. The method allows the UE to access the CS services when congestion at a MSC side is cleared.
Abstract:
A method and system for enabling a User Equipment (UE) to quickly recover back to normal service on failure of registration attempt to a selected Closed Subscriber Group (CSG) cell or loss of coverage of the selected CSG cell is provided. The method provides a UE behavior during manual CSG selection mode when the selected CSG cell is associated with a different Public Land Mobile Network (PLMN) than the Registered PLMN (RPLMN) of the UE. The method also defines the UE actions to handle a user request to change a current Public Land Mobile Network (PLMN) selection mode and handle expiry of a Home PLMN (HPLMN) timer in the UE, when the UE is attached to the selected CSG cell in the manual CSG selection mode.
Abstract:
Methods and apparatuses are provided that prevent a user equipment (UE) from entering into a permanent out of service (OOS) state. The UE receives a registration reject message associated with a permanent cause when the UE triggers a registration request for registering with a first network entity. It is determined whether the UE was previously registered with a second network entity upon receiving the registration reject message associated with the permanent cause. The UE stores a network entity identifier of the first network entity in a temporary forbidden list when the UE was previously registered with the second network entity, to prevent the UE from entering into the permanent OOS state.
Abstract:
A method and user equipment for handling a Public Land Mobile Network (PLMN) selection in a mobile communication network is provided. The method includes obtaining, by a User Equipment (UE), a PLMN list of one or more Radio Access Technologies (RATs) comprising a list of available PLMNs, when the UE performs a Manual Closed Subscriber Group (CSG) selection, initiating a PLMN list validation timer, and reusing the previously obtained PLMN list, when at least one predefined event is triggered and the PLMN list validation timer is running. The at least one predefined event comprises at least one of Home Public Land Mobile Network (HPLMN) timer expiration, a manual PLMN selection, the manual CSG selection, and autonomous CSG selection.
Abstract:
A method for handling checksum error in uplink data compression (UDC) in a wireless communication system includes: detecting, by user equipment (UE), a checksum failure; automatically controlling, by the UE, generation of a number of compressed protocol data units (PDUs) available for transmission at a Packet Data Convergence Protocol (PDCP) based on a package formation rate (PFT); and transmitting, by the UE, a number of compressed PDUs.
Abstract:
A method for connecting to a Registered Public Land Mobile Network (RPLMN) after receiving an accept message with limited service from a user selected CSG cell, which is associated to a different PLMN than the RPLMN during manual CSG selection mode is disclosed. The method includes connecting to the RPLMN based on the availability of the user selected CSG cell in UTRAN. If the user selected CSG cell is not available in UTRAN, then the method includes connecting to the RPLMN by the UE using the stored duplicate value of the RPLMN. If the user selected CSG cell is available in UTRAN, then the method includes sending an ATTACH request to the user selected CSG cell without disabling the EUTRA capabilities. If the ATTACH request is failed, then the method includes connecting to the RPLMN using the stored duplicate value of the RPLMN.