摘要:
In a SDRAM, there is introduced a control signal going active low following a passage of a predetermined period of time after a sense amplifier activation signal goes active high. When a signal going high during a burst period goes low and the control signal also goes low, a word line is dropped, non-selected low. As such, paired bit lines can have a potential difference sufficiently amplified to allow data to be satisfactorily rewritten into a memory cell.
摘要:
In a SDRAM, there is introduced a control signal going active low following a passage of a predetermined period of time after a sense amplifier activation signal goes active high. When a signal going high during a burst period goes low and the control signal also goes low, a word line is dropped, non-selected low. As such, paired bit lines can have a potential difference sufficiently amplified to allow data to be satisfactorily rewritten into a memory cell.
摘要:
A semiconductor device which has a sense amplifier and is supplied with an external power supply voltage includes a drive signal line connected to the sense amplifier, a step up circuit generating a first voltage from the external power supply voltage, the first voltage being higher than the external power supply voltage, and a step down circuit lowering the external power supply voltage into a second voltage. For enabling the sense amplifier to perform sensing operation in a normal mode involving external access, the first voltage is applied to the drive signal line in an initial stage of the sensing operation, and thereafter the second voltage is applied to the drive signal line. In a refresh mode not involving external access, the step up circuit is shut down, and the second voltage is applied to the drive signal line from the initial stage of the sensing operation.
摘要:
In a semiconductor device including a row-based control circuit applied with a current reduction circuit having a standby state and an active state, a refresh control circuit generates a refresh request signal every predetermined time interval on a self-refresh mode and time-sequentially generates an internal active signal at N times in connection with the refresh request signal once. The row-based control circuit time-sequentially refreshes information of memory cells on the based of the internal active signal at the N times. The refresh control circuit inactivates the row-based control circuit by making the current reduction circuit the standby state.
摘要:
An internal voltage generating circuit generates and supplies a boosted voltage higher than an internal power supply voltage, as an operating power supply voltage, to a sense amplifier in a read circuit for reading data of a memory cell. A bit line precharge current supplied via an internal data line is produced from the internal power supply voltage. It is possible to provide a nonvolatile semiconductor memory device, which can perform a precise sense operation and an accurate reading of data even under a low power supply voltage condition.
摘要:
In the present semiconductor device a positive, driving pump circuit is driven by an external power supply potential EXVDD (for example of 1.8V) to generate a positive voltage VPC (for example of 2.4V). A negative pump circuit for internal operation is driven by the positive voltage VPC to generate a negative voltage VNA (for example of −9.2V) required in an erasure or similar internal operation for a word line. The negative pump circuit for internal operation can have a smaller number of stages of pump and hence consume a smaller area than when the circuit is driven by the external power supply voltage EXVDD (for example of 1.8V) as conventional.
摘要:
An internal voltage generating circuit generates and supplies a boosted voltage higher than an internal power supply voltage, as an operating power supply voltage, to a sense amplifier in a read circuit for reading data of a memory cell. A bit line precharge current supplied via an internal data line is produced from the internal power supply voltage. It is possible to provide a nonvolatile semiconductor memory device, which can perform a precise sense operation and an accurate reading of data even under a low power supply voltage condition.
摘要:
In order to stably generate a high voltage of a prescribed level, a Vpp detection circuit which is activated in response to an activation signal for comparing the high voltage with a reference voltage is forcibly brought into an active state for a prescribed period under control of an initial control circuit.
摘要:
A semiconductor memory device includes a first test row decoder (9a) for selecting memory cells in normal rows in a test mode, a second test row decoder (9b) for selecting spare memory cell rows, a first test column decoder (10a) for selecting memory cells in normal columns, and a second test column decoder (10b) for selecting spare memory cell columns. A control circuit (11) may perform switching between four combinations of the row and column decoders by using a control signal (SRT) and a control signal (SCT). All spare memory cells are tested prior to reparation of a defective memory cell for yield enhancement.
摘要:
An internal power supply circuit produces an internal power supply voltage from an external power supply voltage. A voltage level control circuit controls a voltage level and a temperature characteristic of the internal power supply voltage generated by the internal power supply circuit. The internal power supply circuit produces the internal power supply voltage having a negative or zero temperature characteristic in a low temperature region and a positive temperature characteristic in a high temperature region. The voltage level control circuit includes a structure optimizing a capacitance value of a sense power supply line stabilizing capacitance for driving a sense amplifier circuit, a level converting circuit determining the lowest operable region of the external power supply voltage of the internal power supply circuit, or a structure forcedly operating the internal voltage down converter upon power-on. The internal power supply voltage at a desired level is stably produced with a small occupied area and a low current consumption.