Abstract:
A communication device is operative to generate and orthogonal frequency division multiplexing (OFDM) symbol that includes one or more data and ranging modulation symbols. The data and ranging modulation symbols may be included within different sub-carriers of the OFDM symbol. The OFDM symbol is used to generate an OFDM symbol pair in the frequency domain (FDOM). After conversion from the FDOM to the time domain (TDOM), the OFDM symbol pair may then undergoes post-processing in the TDOM before transmission. Such post-processing may include the addition of cyclic prefix (CP) and cyclic suffix (CS) to the OFDM symbol pair in the TDOM as well as filtering using a window function. The OFDM symbol may be generated as an orthogonal frequency division multiple access (OFDMA) symbol, and two were more OFDM symbols or OFDMA symbols may be arranged in a frame.
Abstract:
A communication device is configured adaptively to process a receive signal based on noise that may have adversely affected the signal during transition via communication channel. The device may be configured to identify those portions of the signal of the signal that are noise-affected (e.g., noise-affected sub-carriers of an orthogonal frequency division multiplexing (OFDM) signal), or the device may receive information that identifies those portions of the signal that are noise-affected from one or more other devices. The device may be configured to perform the modulation processing of the received signal to generate log-likelihood ratios (LLRs) for use in decoding the signal. Those LLRs associated with noise-affected portions of the signal are handled differently than LLRs associated with portions of the signal that are not noise-affected. The LLRs may be scaled based on signal to noise ratio(s) (SNR(s)) associated with the signal (e.g., based on background noise, burst noise, etc.).
Abstract:
Embodiments include systems and methods for enabling a physical layer (PHY) link signaling channel between a network termination modem and a cable modem in a cable network. The PHY link signaling channel is embedded within the same multi-carrier channel as the data and enables PHY link up between the network termination modem and cable modem without involvement of higher layers (e.g., MAC). The PHY link signaling channel can be implemented in the downstream (from the network termination modem to the cable modem(s)) or in the upstream from a cable modem to the network termination modem. Embodiments are applicable to any known cable network, and particularly to cable networks implementing the DOCSIS and EPoC standards.
Abstract:
A number of features for enhancing the performance of a communication system, in which data is transmitted between a base station and a plurality of subscriber stations located different distances from the base station, are presented. The power transmission level, slot timing, and equalization of the subscriber stations are set by a ranging process. Data is transmitted by the subscriber stations in fragmented form. Various measures are taken to make transmission from the subscriber stations robust. The uplink data transmission is controlled to permit multiple access from the subscriber stations.
Abstract:
Upstream frequency response measurement and characterization. Signaling is provided between respective communication devices within a communication system. Based upon at least one of these signals, one of the communication devices captures a number of sample sets corresponding thereto at different respective frequencies (e.g., a different respective center frequencies, frequency bands, etc.). Then, spectral analysis is performed with respect to each of the sample sets to generate a respective and corresponding channel response estimate there from. After this number of channel response estimates is determined, they are combined or splice together to generate a full channel response estimate. In implementations including an equalizer, different respective sample sets may correspond to those that have undergone equalization processing and those that have not.
Abstract:
A communication device is configured adaptively to process a receive signal based on noise that may have adversely affected the signal during transition via communication channel. The device may be configured to identify those portions of the signal of the signal that are noise-affected (e.g., noise-affected sub-carriers of an orthogonal frequency division multiplexing (OFDM) signal), or the device may receive information that identifies those portions of the signal that are noise-affected from one or more other devices. The device may be configured to perform the modulation processing of the received signal to generate log-likelihood ratios (LLRs) for use in decoding the signal. Those LLRs associated with noise-affected portions of the signal are handled differently than LLRs associated with portions of the signal that are not noise-affected. The LLRs may be scaled based on signal to noise ratio(s) (SNR(s)) associated with the signal (e.g., based on background noise, burst noise, etc.).
Abstract:
A number of features for enhancing the performance of a communication system, in which data is transmitted between a base station and a plurality of subscriber stations located different distances from the base station, are presented. The power transmission level, slot timing, and equalization of the subscriber stations are set by a ranging process. Data is transmitted by the subscriber stations in fragmented form. Various measures are taken to make transmission from the subscriber stations robust. The uplink data transmission is controlled to permit multiple access from the subscriber stations.