Abstract:
A wireless communication device (UE) may reliably decode control information during wireless cellular communications. The UE may decode the Physical Control Format Indicator Channel (PCFICH) for a given wireless network, and if the decode is unsuccessful, the UE may perform a blind decode of the PCFICH. The UE may decode, for the network, a Physical Downlink Control Channel (PDCCH) for a current subframe using a specified control format indicator (CFI) value. If the decode of the PDCCH is successful, the UE may communicate over the NW, using the specified CFI value. If the decode for the current subframe is unsuccessful, the UE may decode the PDCCH for a different next subframe using a different CFI value until the PDCCH for the NW has been successfully decoded. The CFI value may be specified based at least on common signaling present in certain subframes received by the UE.
Abstract:
Mechanisms enabling link-budget-limited (LBL) devices to more effectively perform random access may include: (1) broadcasting a Physical Random Access Channel (PRACH) configuration index (PCI) reserved for LBL devices; (2) configuring LBL devices to use a PCI that is offset from the conventional PCI of current cell; (3) configuring LBL devices to transmit PRACH messages using an alternative set of subframes, different from conventionally-defined subframe set; (4) configuring LBL devices to transmit PRACH messages on odd frames when the conventional PRACH configuration specifies even frames; (5) configuring LBL devices to generate and use extra PRACH preambles that are not used by non-LBL devices; (6) configuring LBL devices to use group B preambles while non-LBL devices are configured to use group A preambles; and (7) boosting power of a random access response message after an Nth random access failure with preamble conforming to an LBL-reserved pattern of preambles.
Abstract:
Various mechanisms for paging link-budget-limited (LBL) devices are disclosed, including: (1) transmitting paging message with non-conventional paging identifier; (2) transmitting paging message(s) with increased power; (3) repeating transmission of paging message to support combining at receiver. Various mechanisms for UE device to signal LBL status are disclosed, including, transmitting status flag or special value of DRX cycle to network node as part of tracking area update and/or attach request. The network node informs a base station of the device's LBL status as part of a paging message. (The network node may, e.g., assign an S-RNTI to the LBL device from a reserved subset of S-RNTI space.) The base station invokes a paging enhancement mechanism when paging an LBL device. Alternatively, the base station may page UE devices without knowledge of LBL status, e.g., by counting paging attempts for a given UE, and boosting power after the Nth paging attempt.
Abstract:
In some embodiments, a user equipment device (UE) implements improved communication methods which include radio resource time multiplexing, dynamic sub-frame allocation, and UE transmit duty cycle control. In some embodiments, the UE may communicate with base stations using radio frames that include multiple sub-frames, transmit information regarding allocation of a portion of the sub-frames of a respective radio frame for each of a plurality of the radio frames, and transmit and receive data using allocated sub-frames and not using unallocated sub-frames. In some embodiments, the UE may operate according to a sub-frame allocation based on its current power state. The UE may transmit information to the base station and receive the sub-frame allocation based on at least the information. In some embodiments, the UE may switch transmit duty cycles based on an occurrence of a condition at the UE. The UE may inform the network of the switch.
Abstract:
Apparatuses, systems, and methods for a wireless device to perform a method including a user equipment device (UE) exchanging communications with a base station to determine one or more scheduling profiles, such as one or more scheduling-power profiles, where a scheduling-power profile may specify one or more parameters associated with UE communication behavior, e.g., one or more constraints on UE communication behavior and/or slot scheduling of UE communications. In addition, the method may include the UE receiving a slot configuration schedule from the base station. The slot configuration schedule may be based on at least one scheduling-power profile of the one or more scheduling-power profiles. Further, the method may include the UE performing communications with the base station based on the at least one scheduling-power profile.
Abstract:
A user equipment (UE) is configured to perform rate matching for reference signals under certain conditions. The UE receives information associated with a downlink reference signal for a first radio access technology (RAT), wherein the first RAT is different than a currently camped second RAT, identifies reference signal occasions for the downlink reference signal and receives downlink control information from the second RAT via a physical downlink control channel (PDCCH).
Abstract:
Apparatuses, systems, and methods for a wireless device to perform methods for determining resources for scheduling side-link communications. The resources may be semi-persistent and/or dynamic resources. A user equipment device (UE) may determine a resource map for use in scheduling semi-persistent resources for side-link communications with at least one wireless node. The UE may transmit a resource map request message indicating preferred resource blocks, where each resource block may be defined by a time and a frequency. The UE may receive a confirmation message that may include a report regarding a set of resource blocks. The set of resource blocks may be from the preferred resource blocks included in the resource map request message. The UE may determine, based, at least in part, on the confirmation message, resource blocks to be used for the side-link communications and initiate the side-link communications using the determined resource blocks.
Abstract:
Apparatuses, systems, and methods for a base station to perform a method construct dynamic hierarchical sub-configurations of bandwidth parts (BWPs) for use in a connected mode discontinuous reception (CDRX) communication session with a user equipment (UE) device. The base station may configure a first BWP at a baseband frequency associated with the CDRX communication session as a default BWP, a second BWP with a wider bandwidth than the first BWP as a transmission BWP, and one or more third BWPs as resting BWPs. The transmission BWP and the one or more resting BWPs may be configured to periodically override the default BWP as the active BWP for a predetermined number of CDRX cycles. The transmission BWP may be utilized, when activated to perform data transmission by UE device, and the one or more resting BWPs may be utilized, when activated, for performing channel measurements.
Abstract:
A method performed by a user equipment (UE) configured with a plurality of antenna panels. Each antenna panel is configured to beamform over a millimeter wave (mmWave) frequency band. The method includes identifying a predetermined condition corresponding to a first antenna panel of the plurality of antenna panels, selecting a second antenna panel of the plurality of antenna panels based on identifying the predetermined condition corresponding to the first antenna panel and transmitting a beam via the second antenna panel based on the selection.
Abstract:
Systems and methods are provided for a user equipment (UE) to perform frequency offset (FO) delta tracking. For an anchor component carrier (CC), the UE wakes up to perform tracking updates on a plurality of successive DRX cycles. For the non-anchor CC, the UE determines a minimum update interval Δtupd, and schedules wake-ups on a first subset of the plurality of successive DRX cycles based on the minimum update interval Δtupd. For the first subset of the plurality of successive DRX cycles with scheduled wake-ups, the UE performs the tracking updates on the non-anchor CC and updates an FO delta between the anchor CC and the non-anchor CC. For a second subset of the plurality of successive DRX cycles without the scheduled wake-ups on the non-anchor CC, the UE applies the FO delta to correct for a frequency error.