摘要:
Embodiments for bandwidth allocation methods, detecting interference with other systems, and/or redeploying in alternate bandwidth are described. Higher bandwidth channels may be deployed at channel boundaries (410), which are a subset of those for lower bandwidth channels (310), and may be restricted from overlapping. Interference may be detected (930) on primary, secondary, or a combination of channels, and may be detected in response to energy measurements (910) of the various channels. When interference is detected, a higher bandwidth Basic Service Set (BSS)(100) may be relocated to an alternate channel, or may have its bandwidth reduced to avoid interference. Interference may be detected based on energy measured on the primary or secondary channel, and/or a difference between the two. An FFT (1010) may be used in energy measurement in either or both of the primary and secondary channels. Stations may also monitor messages from alternate systems to make channel allocation decisions. Various other aspects are also presented.
摘要:
Embodiments for bandwidth allocation methods, detecting interference with other systems, and/or redeploying in alternate bandwidth are described. Higher bandwidth channels may be deployed at channel boundaries (410), which are a subset of those for lower bandwidth channels (310), and may be restricted from overlapping. Interference may be detected (930) on primary, secondary, or a combination of channels, and may be detected in response to energy measurements (910) of the various channels. When interference is detected, a higher bandwidth Basic Service Set (BSS)(100) may be relocated to an alternate channel, or may have its bandwidth reduced to avoid interference. Interference may be detected based on energy measured on the primary or secondary channel, and/or a difference between the two. An FFT (1010) may be used in energy measurement in either or both of the primary and secondary channels. Stations may also monitor messages from alternate systems to make channel allocation decisions. Various other aspects are also presented.
摘要:
Techniques to support beamforming for stations in a wireless network are described. In one aspect, a station may support beamforming with implicit feedback or explicit feedback by having capabilities to transmit and receive sounding frames, respond to training request by sending a sounding frame, and respond to request for explicit feedback. In one design of explicit beamforming, the station may send a first frame with a request for explicit feedback and may also send a Null Data Packet (NDP) having at least one training field but no data field. The station may receive a second frame with the explicit feedback, which may be derived based on the NDP. The station may derive steering information (e.g., steering matrices) based on the explicit feedback and may then send a steered frame with beamforming based on the steering information. The station may also perform implicit beamforming using NDP for sounding.
摘要:
Techniques for quickly sending feedback information for beamforming are described. A transmitter/initiator sends a first frame comprising training symbols. A receiver/responder receives the first frame, determines the amount of time to generate feedback information, and determines the amount of time to send the feedback information. The receiver then determines the length of a second frame carrying the feedback information based on the amounts of time to generate and send the feedback information. The receiver sends the second frame after waiting a short interframe space (SIFS) period from the end of the first frame, without performing channel access. The receiver generates the feedback information based on the training symbols and sends the information in the second frame when ready. The transmitter receives the second frame, derives at least one steering matrix based on the feedback information, and sends a third frame with the at least one steering matrix.
摘要:
Apparatuses and methodologies are described that coordinate multiple wireless communication protocols within a mobile device. A single mobile device can contain multiple communication components (e.g., a Bluetooth component, an IEEE 802.11b/g component). To prevent interference and possible loss of data, one communication component may be prevented from transmitting or receiving data packets while the other communication component is either transmitting or receiving. The components may be coordinated by a central controller located in the mobile device. Alternatively, the communication components may exchange messages to determine transmission or reception priority. In addition, one communication component may monitor the status of the other communication component to determine unused communication slots.
摘要:
Techniques to efficiently schedule and serve stations in a wireless network are described. An access point may aggregate stations with flows carrying traffic having similar characteristics, e.g., VoIP flows. The access point may schedule these stations together in an overall service period. The access point may serve each station in a respective service period within the overall service period. The access point may send a multi poll frame at the start of the overall service period to indicate the start time and/or service period for each station. Each station may decide to power down until its start time. The service periods for the stations may overlap one another. The service period for each station may cover an initial transmission as well as additional transmission and/or retransmission. If additional transmission and/or retransmission are not needed for a given station, then the next station may be served right away.
摘要:
Embodiments for bandwidth allocation methods, detecting interference with other systems, and/or redeploying in alternate bandwidth are described. Higher bandwidth channels may be deployed at channel boundaries (410), which are a subset of those for lower bandwidth channels (310), and may be restricted from overlapping. Interference may be detected (930) on primary, secondary, or a combination of channels, and may be detected in response to energy measurements (910) of the various channels. When interference is detected, a higher bandwidth Basic Service Set (BSS)(100) may be relocated to an alternate channel, or may have its bandwidth reduced to avoid interference. Interference may be detected based on energy measured on the primary or secondary channel, and/or a difference between the two. An FFT (1010) may be used in energy measurement in either or both of the primary and secondary channels. Stations may also monitor messages from alternate systems to make channel allocation decisions. Various other aspects are also presented.
摘要:
Embodiments describe registration in a wireless communication system. A method includes wirelessly transmitting over a WWAN a first registration message from a mobile device, wirelessly transmitting through the WWAN a second registration message to a WLAN access point and receiving at the mobile device access through the WLAN access point. According to another embodiment is a method for constructing a self-configuring ad-hoc network. The method can include receiving a GPS coordinate from a WWAN channel node at a management system and creating an initial topography based at least in part on the GPS coordinate to achieve a network connectivity with diverse routes between a plurality of nodes.
摘要:
Embodiments describe utilizing time-based information to improve communication in a wireless network. A method can include receiving beacon information from at least one access point and utilizing time-stamp information associated with the beacon information to determine whether to hand off communication with a second access point. According to other embodiments the method can further include detecting beacon quality is below a threshold level and transmitting a poor beacon quality message. Information relating to a plurality of alternate access points can be received in response to the transmitted poor beacon quality message.
摘要:
Techniques to support beamforming for stations in a wireless network are described. A station may support beamforming with implicit or explicit feedback by having capabilities to transmit and receive sounding frames, responding to training request by sending a sounding frame, and responding to request for explicit feedback. In one explicit beamforming embodiment, the station may send a first frame with an explicit feedback request and may also send a Null Data Packet (NDP) having at least one training field but no data field. The station may receive a second frame with explicit feedback, which may be derived based on the NDP. The station may derive steering information based on explicit feedback and may then send a steered frame with beamforming based on the steering information. Other aspects, embodiments, and features are also claimed and described.