Abstract:
Methods, systems, and devices are described for wireless communication. A wireless device may detect a delay in reverse link throughput. The wireless device may reduce the delay by modifying channel access parameters. In one aspect, the wireless device may adjust enhanced distributed channel access (EDCA) parameters. For example, the wireless device may modify contention window size (CW) and arbitration interframe spacing (AIFS). In some cases, the wireless device may instigate EDCA parameter adjustments in another wireless device in the wireless system (e.g., by sending an EDCA adjustment request message). The channel access adjustments may be triggered by detection of various conditions that are indicative of the reverse link delay. For example, the wireless device may monitor the communication of acknowledgments (ACKs) and adjust EDCA parameters if the ACKs are delayed. In other cases, the wireless device may adjust EDCA parameters based at least in part on multi-user (MU) communications.
Abstract:
Systems and methods are disclosed that may adjust the likelihood and/or frequency with which a wireless device performs scanning operations to reduce power consumption without degrading the ability of the wireless device to identify the best available access point with which to associate. In some aspects, the wireless device may adjust the likelihood and/or frequency of performing scanning operations based on a motion state of the wireless device, a change in the motion state of the wireless device, a signal strength of an associated access point, and/or the connection status of the wireless device.
Abstract:
In one example, a method includes determining, by a wireless dockee (WD), one or more peripheral functions (PFs) associated with a wireless docking center (WDC). In this example, the method further includes establishing a docking session via a direct wireless connection between the WD and the WDC. In this example, the method further includes selecting, by the WD, at least one PF of the one or more PFs associated with the WDC. In this example, the method further includes accessing, by the WD, the at least one PF of the one or more PFs associated with the WDC.
Abstract:
Methods, systems, and devices are described for wireless communications. A device may utilize enhanced roaming techniques to identify a candidate channel for roaming. In one example, a device determines whether a candidate channel is congested by calculating a congestion metric associated with traffic over the shared channel. In some examples, the congestion metric is calculated based at least in part on an amount of energy measured over the candidate. For instance, the calculated congestion metric can be an instantaneous congestion level measured during a CCA. The device may then determine whether to roam to the candidate channel based at least in part on the calculated congestion metric.
Abstract:
Methods, systems, and devices are described for wireless communication. In one aspect, a method of wireless communication includes determining a transmit time metric associated with each transmission group of a number of transmission groups based at least in part on an amount of data in a transmit queue and a modulation and coding scheme (MCS) data rate for at least one wireless communication device in the transmission group. The method also includes scheduling a transmission to a first transmission group of the number of transmission groups based at least in part on the transmit time metric for the first transmission group.
Abstract:
Methods, devices, and computer-readable media for wireless communication may involve techniques for managing multi-user (MU) operation when a device in a wireless network has coexisting radios. Such techniques may involve identifying a change in a multiple radio access technology (RAT) coexistence status of a first device, e.g., a change between a coexistence status that is not disruptive to MU communications and one that is disruptive. For a device communicating with a network using Wi-Fi, the change in the multiple RAT coexistence status may indicate a change between inactive Bluetooth (BT) communications and active BT communications concurrent with Wi-Fi communications. Based at least in part on the identified change in the multiple RAT coexistence status, a MU communications operation at a second device may be adjusted, for example, by disabling MU communication between the first and second devices over a first RAT when the first device changes to a coexistence status that may disrupt MU communications.
Abstract:
An extensible hub is disclosed for providing multi-hop wireless communication among universal serial bus (USB) devices, for example, utilizing a WiGig Serial Extension (WSE) air interface. The extensible hub may include a device protocol adaptation layer (PAL), as well as a host PAL, and further a bridge for providing a data flow path between the device and host PALs. The bridge may be configured to distinguish between request messages and response messages in accordance with a header on those messages. Further, the extensible hub may include virtual ports and may map device handles and endpoint handles to provide for routing of messages to the correct downstream devices in a multi-hop network tree.
Abstract:
Systems and methodologies are described that facilitate supporting mobility for UEs and relay eNBs in split-cell relay configurations. Parameters regarding communicating with one or more UEs can be provided to disparate eNBs from a donor eNB to provide mobility for one or more of the UEs or a serving relay eNB. In addition, a donor eNB can request establishment of one or more radio bearers at a target relay eNB for continuing communications with one or more UEs. Moreover, a donor eNB can provide information regarding one or more core network bearers to a target donor eNB to facilitate establishing the core network bearers at the target donor eNB for communicating with the one or more UEs. Furthermore, uplink buffer contents from a relay eNB can be provided to a target donor eNB so communications from the one or more UEs can be continued by the target donor eNB.
Abstract:
A wireless dockee or a wireless docking center may utilize a fine timing measurement procedure to determine propagation times for signals communicated between the devices. Based on the propagation time, the wireless dockee or the wireless docking center may calculate their proximity to each other. When the proximity supports a wireless docking session, the wireless dockee or the wireless docking center may initiate a wireless docking session. The wireless docking session may include docking the wireless dockee to the wireless docking center and/or undocking the wireless dockee to the wireless docking center.
Abstract:
Methods, systems, and apparatuses are described for wireless communication. In one method, a request may be received at a Wi-Fi docking center (WDC) regarding one or more peripheral function protocols (PFPs) supported by the WDC, and a response message indicating whether the WDC supports at least a Wi-Gig Bus Extension (WBE) as a PFP or a Wi-Gig Display Extension (WDE) as a PFP may be transmitted. In another method, a request may be transmitted to a WDC regarding one or more PFPs supported by the WDC, and a response message may be received from the WDC. The request may be transmitted using a first peer-to-peer (P2P) connection. The response message may indicate whether the WDC supports at least a WBE as a PFP or a WDE as a PFP.