Abstract:
In order to reduce power consumption of an electronic device during communication with another electronic device in a wireless local area network (WEAN), the electronic device analyzes fields in a given packet prior to a payload of the given packet to look for information that specifies a destination of the given packet. For example, the information may include: a full associated identification (AID) of the destination, a partial media-access-control (MAC) address of the destination; and/or a compressed (MAC) address of the destination. The information may be included in the preamble of the given packet. In particular, the information may replace length information in a high-throughput signal field in the given packet. Moreover, if the destination is other than the electronic device, the electronic device dumps the given packet and changes a power state of the electronic device, thereby reducing the power consumption.
Abstract:
A method for determining whether an acknowledgement received by a user equipment from an external device is a forced acknowledgement. The method including transmitting a set of data stored in an uplink buffer to an external device, receiving an acknowledgement from the external device, determining if the acknowledgement received from the external device was a forced acknowledgement and flushing out an uplink buffer if determined that the acknowledgement was not a forced acknowledgement. The determining the acknowledgement is a forced acknowledgment being based on whether an uplink retransmission collides with one or more scheduled transmission times, a Physical Hybrid-ARQ Indicator Channel (PHICH) falls between gap measurements and an uplink retransmission collides with one of the gap measurements or a TTI bundling retransmission collides with a gap measurement. If the acknowledgement is not a forced acknowledgment, a set of data stored in the uplink buffer is retransmitted to the external device.
Abstract:
A single chip mobile wireless device capable of receiving and transmitting over one wireless network at a time maintains registration on two wireless communication networks that each use different communication protocols in parallel. Periodically, the mobile wireless device tunes one or more receivers from a first wireless network to a second wireless network in order to listen for paging messages addressed to the mobile wireless device from the second wireless network. The first wireless network suspends allocation of radio resources to the mobile wireless device based on receipt of a suspension message from the mobile wireless device, or based on knowledge of a paging cycle for mobile wireless device in the second wireless network, or based on detection of an out of synchronization condition with the mobile wireless device.
Abstract:
A wireless electronic device having first and second baseband processors is provided. In one suitable arrangement, radio-frequency power splitters and adjustable low noise amplifiers may be form in the receive paths. The use of power splitters allow signals associated with the first and second baseband processors to be received in parallel. In another suitable arrangement, radio-frequency switches are used in place of the power splitters. The states of the switches may be controlled using at least one of the first and second baseband processors. The use of switches instead of power splitters requires that wake periods associated with the first baseband processor and wake periods associated with the second baseband processor are non-overlapping. To ensure minimal wake period collision, a wake period associated with the second baseband processor may be positioned at a midpoint between two successive wake periods associated with the first baseband processor.
Abstract:
Various embodiments are disclosed of a method and apparatus for fast communication recovery in wireless mobile devices arranged to perform dual network radio resource management. In one embodiment, a wireless mobile device includes a transceiver configured to communicate with each of first and second networks. After establishing and maintaining a link with the first network, the wireless mobile device may tune a transceiver to the second network to monitor for traffic, subsequently tuning back to the first network. After turning the transceiver back to the first network, the wireless mobile device may perform one or more attempts to restore the link to the first network. The number of attempts to restore the link is dependent upon an amount of time the transceiver is tuned to the second network.
Abstract:
Methods and apparatus for interference coordination to improve transmission and reception performance within wireless networks. In one exemplary embodiment, a wireless transmitter transmits multiple transmissions over a determined time. The receiver receives the multiple transmissions and attempts to recover the transmitted signal. Because, the fading channel varies over time for each transmitter-receiver, by combining the received signals over multiple iterations, the signal of interest will be magnified, whereas interference effects will be suppressed.
Abstract:
This application discloses various techniques for call establishment using voice-over LTE (VoLTE) in networks supporting time division (TD) and frequency division duplexed (FDD) LTE communication systems. Such techniques can include systems and methods for mobile-originated calls for a UE in a TD-LTE cell, systems and methods for mobile-terminated calls for a connected UE in a TD-LTE cell and systems and methods for mobile-terminated calls for an idle UE in a TD-LTE cell. These methods and systems can leverage component carriers from a carrier aggregating capable UE to facilitate more efficient and/or effective UE call establishment.
Abstract:
Apparatus and methods for a hybrid automatic repeat request (H-ARQ) mechanism for wireless communication devices of a wireless local area network (WLAN) are disclosed. Methods and apparatus to determine whether a packet is an original, first transmission or a retransmission of a previously transmitted packet without decoding the payload of the packet are disclosed. Medium access control (MAC) addresses of a transmitter, such as an access point (AP), and a receiver, such as a station (STA), of a WLAN are encoded separately with a retransmission bit to indicate whether the packet is retransmitted. For an aggregated MAC protocol data unit (A-MPDU), a sequence number is included to determine which MAC protocol data units (MPDUs) of the A-MPDU are retransmitted. When retransmission is indicated, the receiver of the STA performs a hybrid automatic repeat request (H-ARQ) process to combine the retransmitted packet with previously received packets.
Abstract:
A method for facilitating in-device coexistence between wireless communication technologies on a wireless communication device is provided. The method can include transmitting data traffic from the wireless communication device via an aggressor wireless communication technology; determining occurrence of an in-device interference condition resulting from transmission of the data traffic via the aggressor wireless communication technology interfering with concurrent data reception by the wireless communication device via a victim wireless communication technology; and reducing a bit rate of the data traffic transmitted via the aggressor wireless communication technology in response to the in-device interference condition.
Abstract:
In order to facilitate communication between an electronic device and another electronic device, the electronic device determines communication-quality metrics for a first connection in a wireless network based on received information from the other electronic device. Then, the electronic device calculates an overall communication-quality indicator for the first connection based on at least some of the communication-quality metrics. Moreover, the electronic device dynamically adapts the communication with the other electronic device based on the overall communication-quality indicator. For example, the electronic device may establish a second connection in a cellular-telephone network and may use the second connection to communicate with the other electronic device. Alternatively, the electronic device may provide the overall communication-quality indicator to the other electronic device and may at least partially transition the communication from the second connection in the cellular-telephone network to the first connection in the wireless network.