摘要:
A fixed position remote control unit 20 as used with a movable barrier operator 11 has an externally accessible plug-in module interface 25. This interface 25 operably couples to the link 23 and 24 between the remote control unit 20 and the operator 11. So configured, a plug-in module 40 that docks and couples with this plug-in module interface 25 can receive operating (or charging) power from the movable barrier operator 11, exchange signaling with the movable barrier operator 11, or both. The ability to readily exchange signaling without invasive wiring permits a wide variety of plug-in modules 40 to be utilized.
摘要:
A movable barrier operator includes an absolute position detector which provides a unique value for each position of the barrier along its path of travel. The absolute position detector employs multiple binary serial streams and one multiple clock stream. After the first five cycles of the clock stream, the binary streams can be decoded by a processor to produce an absolute position. Every clock edge produces a new absolute position along the path of travel.
摘要:
A movable barrier operator having improved safety and energy efficiency features automatically detects line voltage frequency and uses that information to set a worklight shut-off time. The operator automatically detects the type of door (single panel or segmented) and uses that information to set a maximum speed of door travel. The operator moves the door with a linearly variable speed from start of travel to stop for smooth and quiet performance. The operator provides for full door closure by driving the door into the floor when the DOWN limit is reached and no auto-reverse condition has been detected. The operator provides for user selection of a minimum stop speed for easy starting and stopping of sticky or binding doors.
摘要:
A wall control unit for a movable barrier operator sends baseband signals over a wire connection to a head unit of a movable barrier operator to command the movable barrier to perform barrier operator functions. The wall control unit has a wall control unit port for connection to the wire connection. A first switch sends a barrier command signal to the head unit commanding the head unit to open or close a movable barrier. A second switch commands the head unit to provide energization to a light source. An infrared detector causes a command signal to be sent to the head unit to control the illumination state of the light source.
摘要:
An electronic service reminder to automatically notify a user as to when and what type of maintenance should be performed on the garage door operator, based on a variety of factors, including time, materials and operating environment. The garage door operator is configured to automatically generate an electronic service reminder in the form of an audible or visual alert based on one or more operating parameters of the garage door operator meeting or exceeding a predefined threshold. The predefined threshold is variable based on the values of the operating parameters.
摘要:
A barrier mount system is disclosed which opens and closes a barrier such as a gate or garage door in response to user generated commands. Obstruction detection apparatus is provided for safety of operator. When an obstruction is sensed, the barrier movement system is inhibited from responding to user generated commands until a predetermined event occurs. The event may be passage of a predetermined amount of time or barrier movement of a particular amount.
摘要:
A barrier movement operator system having a receiver for receiving, learning and responding to transmitted rolling code type access codes; at least one trained transmitter for operating the system by transmitting a rolling code type access code to the receiver; at least one learning transmitter for learning the rolling code type access code from said trained transmitter in order to operate the system; a controller for evaluating the relationship between the learning transmitter rolling type access code and the trained transmitter rolling type access code; and a device for providing a barrier movement in response to access codes received by the receiver. The barrier movement operator provides a method of learning valid security codes by a security code receiver comprising the steps of receiving a first security code, then within a predetermined period of time receiving a second security code, having a predetermined relationship to the first security code; and storing a representation of the second security code as a valid security code.
摘要:
A rolling code transmitter is useful in a security system for providing secure encrypted RF transmission comprising an interleaved trinary bit fixed code and rolling code. A receiver demodulates the encrypted RF transmission and recovers the fixed code and rolling code. Upon comparison of the fixed and rolling codes with stored codes and determining that the signal has emanated from an authorized transmitter, a signal is generated to actuate an electric motor to open or close a movable barrier.
摘要:
A movable barrier operator having improved safety and energy efficiency features automatically detects line voltage frequency and uses that information to set a worklight shut-off time. The operator automatically detects the type of door (single panel or segmented) and uses that information to set a maximum speed of door travel. The operator moves the door with a linearly variable speed from start of travel to stop for smooth and quiet performance. The operator provides for full door closure by driving the door into the floor when the DOWN limit is reached and no auto-reverse condition has been detected. The operator provides for user selection of a minimum stop speed for easy starting and stopping of sticky or binding doors.
摘要:
A movable barrier operator (10) has a wireless status condition data transmitter (15) that wirelessly transmits status condition messages to one or more remote peripherals (20). The latter can in turn use this status information to effect their own functionality and supported features.