摘要:
Performing inter-band carrier aggregation based on device capability includes monitoring a dominant type of wireless devices in a wireless sector based on whether or not they are capable of inter-band carrier aggregation, and enabling or disabling inter-band carrier aggregation in the sector based on the dominant type. Enabling/disabling inter-band carrier aggregation can include allowing or preventing usage of usage of a low-frequency carrier as a primary component carrier aggregated with a high-frequency carrier as a secondary component carrier. Carriers using FDD and TDD duplexing modes are included.
摘要:
Performing handovers based on RACH capabilities includes instructing neighboring access nodes to share RACH capabilities with each other, identifying a RACH capability of wireless devices attached to a serving access node, and selecting a target access node based on matching the RACH capabilities. The RACH capabilities are associated with a format and/or a range or distance of RACH transmissions.
摘要:
Systems and methods are described for determining an access node for a wireless device. A first signal may be transmitted from a first access node with an increased signal level. An indication of a first adjustment factor based on the increased first signal level may also be transmitted from the first access node. Signal information may then be received from a wireless device, where the signal information includes a determined first signal level associated with the first access node and a determined second signal level associated with a second access node. The determined first signal level from the signal information may comprise a received signal level of the first signal decreased by the first adjustment factor. Based on the signal information, one of the first access node and the second access node may be selected for communication with the wireless device and the wireless device may be instructed to communicate with the selected access node.
摘要:
Link adaptation for an uplink channel is dynamically performed based on changes in uplink resources in the wireless network, the changes based on frame configuration. If the ratio of uplink to downlink subframes in the new frame configuration is smaller, the throughput is increased by increasing a modulation and coding scheme of the uplink channel, and transmit power of wireless devices. If the ratio of uplink to downlink subframes is increased in the new frame configuration, the throughput is decreased, and the wireless device is instructed to transmit using reduced transmit power.
摘要:
Interference caused between neighboring access nodes deploying wireless air-interface resources in different frame configurations while using the same frequency sub-band is mitigated by modifying the subframes deployed by a first access node by muting the subframes in the first frame configuration. Wireless resources from a different frequency sub-band can be aggregated towards the interfering subframes. A third access node adjacent to the first access node may deploy wireless resources in the first frame configuration and using the second frequency sub-band. A determination of how to reconfigure the interfering subframes is based on numbers of wireless devices in potential interference zones between each access node.
摘要:
Mitigating interference in distributed antenna systems (DAS) includes determining, at a processing node of the DAS, that a first wireless device attached to a first access node is within a coverage area of one or more antennae of the DAS, and transmitting, from the processing node to the first access node, a request to trigger a handover of the first wireless device from the first access node to the DAS. The first access node triggers the handover by instructing the first wireless device to perform a signal measurement.
摘要:
One or more factors are determined for a target cell, the one or more factors being at least one of a morphology, a band class, a loading, and a MIMO type. A modified target cell signal strength threshold for the target cell is set using the one or more factors. The modified target cell signal strength threshold is utilized to initiate a transfer of the wireless device from the serving cell to the target cell.
摘要:
Systems and methods are described for determining a carrier for a wireless device. Data may be communicated between a wireless device and a wireless communication network over a first carrier. It may be determined whether the wireless communication network provides a fallback protocol for switching the wireless device from the first carrier to a second carrier. The wireless device may be instructed to communicate with the wireless communication network over the second carrier when it is determined that the wireless communication network does not provide the fallback protocol.
摘要:
Systems and methods are described for scheduling transmissions from an access node. A location may be determined for a plurality of small cells within an access node signal area. Based on the determined locations, a scheduling algorithm may be selected for the access node, where the scheduling algorithm may comprise one of a low proportional fairness scheduling algorithm, a medium proportional fairness scheduling algorithm, and a high proportional fairness scheduling algorithm. Data may then be transmitted from the access node to a plurality of wireless devices based on the selected scheduling algorithm.
摘要:
Systems and methods are described for determining a handover condition in a wireless communication network. A plurality of active wireless devices in communication with a first access node may be detected. Measurement and reporting information may be received at the first access node from the wireless devices indicating proximity to a second access node. A criteria for selecting a wireless device in communication with the first access node for handover may be determined. A bias factor for the selected wireless device based on the received measurement and reporting information may be calculated. The bias factor may be provided to the selected wireless device and the first access node and/or a controller node may instruct the selected wireless device to communicate with the second access node.