摘要:
A novel power conservation scheme is provided for conserving power in a wireless client terminal with an established communication session. While in a connected mode, the client terminal may receive data for the communication session via a data channel from an access point. During periods of inactivity over the data channel, the client terminal may switch to a lowered power mode, where the client terminal discontinuously monitors a control channel and does not monitor the data channel. The access point is informed of the operating mode of the client terminal. If a data resume indicator is received over the control channel, the client terminal switches back to the connected mode and resumes the communication session by receiving additional data over the data channel.
摘要:
A scheme is provided for conserving power in client terminals and/or reducing latency in wireless systems by using a proxy device. The client terminal may have a primary communication interface for communications with an access node and a secondary communication interface to communicate with the proxy device. The client terminal may indicate to the access node a short cycle rate for monitoring its signaling/control channel(s). The client terminal may the power off its primary communication interface without informing the access node. Prior to powering off its primary communication interface, the client terminal may assign the proxy device to act as its proxy and monitor the signaling/control channel with the access node. The proxy device monitors the signaling/control channel(s) according to the indicated short cycle rate. Upon detection of a message for the client terminal, the proxy device forwards the message to the client terminal via a secondary communication interface.
摘要:
Systems, methods, devices, and computer program products are described for mitigating macrocell interference during femtocell discovery in a wireless communications system. In one example, a mobile device may be camped on a macrocell. A femtocell transmits out-of-band (OOB) discovery signals to, or receives OOB band discovery signals from, the mobile device to facilitate presence detection. The femtocell may also be configured to use various techniques to transmit in-band beacon bursts (e.g., low or high power beacon bursts) to the mobile device in the macrocell frequency range to trigger the mobile device to perform an inter-frequency scan for cell reselection. The femtocell may transmit communications signals to the mobile device in a femtocell frequency range (different from the macrocell frequency range) after the mobile device has discovered and selected the femtocell.
摘要:
Systems, methods, devices, and computer program products are described for supporting macrocell-to-femtocell hand-ins of active macro communications for mobile access terminals. A femto-proxy system is provided including a femtocell and an out-of-band (OOB) proxy. While the femtocell may be addressed by the macro network according to a potentially non-unique identifier (e.g., its PN offset), the OOB proxy is addressable according to a unique OOB identifier (e.g., a Bluetooth device address, BD_ADDR). When the mobile access terminal is in proximity to the femto-proxy system, it detects the OOB proxy and communicates the unique OOB identifier to the core network via the macro network (e.g., as part of a measurement report). The OOB identifier is mapped (e.g., in the core network) to the femtocell, allowing the core network to uniquely identify the appropriate target femtocell for active hand-in.
摘要:
A scheme is provided for conserving power in client terminals and/or reducing latency in wireless systems by using a proxy device. The client terminal may have a primary communication interface for communications with an access node and a secondary communication interface to communicate with the proxy device. The client terminal may indicate to the access node a short cycle rate for monitoring its signaling/control channel(s). The client terminal may the power off its primary communication interface without informing the access node. Prior to powering off its primary communication interface, the client terminal may assign the proxy device to act as its proxy and monitor the signaling/control channel with the access node. The proxy device monitors the signaling/control channel(s) according to the indicated short cycle rate. Upon detection of a message for the client terminal, the proxy device forwards the message to the client terminal via a secondary communication interface.
摘要:
Out of band (OOB) communication facilitates femtocell operation. One or more proximity agent provides out of band communication with nodes (e.g., mobile client devices) to provide assistance in or otherwise facilitate femtocell discovery, reselection, and/or interference mitigation. Out of band communication techniques provide for low power discovery, association, and communication as compared to corresponding femtocell or cellular network communication techniques. An OOB proximity agent is provided in association with a femtocell to provide transmit power level control with respect to the femtocell. In operation, if a client device searches for and finds an OOB proximity agent, it will find a femtocell, thereby avoiding a need to aggressively search for femtocells.
摘要:
Systems, methods, devices, and computer program products are described for supporting macrocell-to-femtocell hand-ins of active macro communications for mobile access terminals. A femto-proxy system is provided including a femtocell and an out-of-band (OOB) proxy. While the femtocell may be addressed by the macro network according to a potentially non-unique identifier (e.g., its PN offset), the OOB proxy is addressable according to a unique OOB identifier (e.g., a Bluetooth device address, BD_ADDR). When the mobile access terminal is in proximity to the femto-proxy system, it detects the OOB proxy and communicates the unique OOB identifier to the core network via the macro network (e.g., as part of a measurement report). The OOB identifier is mapped (e.g., in the core network) to the femtocell, allowing the core network to uniquely identify the appropriate target femtocell for active hand-in.
摘要:
Systems, methods, devices, and computer program products are described for mitigating macrocell interference during femtocell discovery in a wireless communications system. In one example, a mobile device may be camped on a macrocell. A femtocell transmits out-of-band (OOB) discovery signals to, or receives OOB band discovery signals from, the mobile device to facilitate presence detection. The femtocell may also be configured to use various techniques to transmit in-band beacon bursts (e.g., low or high power beacon bursts) to the mobile device in the macrocell frequency range to trigger the mobile device to perform an inter-frequency scan for cell reselection. The femtocell may transmit communications signals to the mobile device in a femtocell frequency range (different from the macrocell frequency range) after the mobile device has discovered and selected the femtocell.
摘要:
A power conservation scheme is provided for conserving power in an access terminal that includes a dedicated proxy circuit, a receiver/transmitter chain, and/or a baseband processor. The baseband processor is adapted to determine when a wireless communication link with an access network has been inactive for at least a threshold amount of time. If such inactivity is ascertained, the baseband processor sends a proxy request to the proxy circuit. Upon receiving such proxy request, the proxy circuit monitors a data, control, and/or paging channel on behalf of the access terminal while the baseband processor is powered down. If a signal is received for the access terminal over the monitored channel, then a wake-up signal is sent to the baseband processor to cause it to power up and monitor a data channel. Upon receiving a response from the baseband processor, the proxy circuit may stop operating as a proxy.
摘要:
A power conservation scheme is provided for conserving power in an access terminal that includes a dedicated proxy circuit, a receiver/transmitter chain, and/or a baseband processor. The baseband processor is adapted to determine when a wireless communication link with an access network has been inactive for at least a threshold amount of time. If such inactivity is ascertained, the baseband processor sends a proxy request to the proxy circuit. Upon receiving such proxy request, the proxy circuit monitors a data, control, and/or paging channel on behalf of the access terminal while the baseband processor is powered down. If a signal is received for the access terminal over the monitored channel, then a wake-up signal is sent to the baseband processor to cause it to power up and monitor a data channel. Upon receiving a response from the baseband processor, the proxy circuit may stop operating as a proxy.