摘要:
Methods, systems, and devices for separating signaling data and traffic data onto separate carriers for wireless communications systems are provided. Some embodiments utilize flexible bandwidth that may utilize portions of spectrum that may not be big enough to fit a normal waveform through utilizing flexible waveforms. Flexible bandwidth systems may lead to reduced data rate on the signaling or other channels. Separating the signaling and the data traffic into different flexible bandwidth carriers so that assigned resources can be customized to different traffic patterns may address this issue. In some embodiments, the signaling data is received and/or transmitted over a first carrier separate from any other traffic data. For example, the signaling data may be received and/or transmitted over the first band carrier without any other traffic data. The traffic data and/or network data associated with the signaling data may be received and/or transmitted over a separate, second carrier.
摘要:
Methods, systems, and devices for utilizing flexible bandwidth carriers for small cells are provided. Bandwidth scaling factor(s) for a small cell may be determined. A flexible bandwidth carrier may be generated for the small cell utilizing the bandwidth scaling factor. Some embodiments provide assistance with active hand-in due to more available PN offsets in the flexible bandwidth domain. Some embodiments enhance small cell discovery with high bandwidth scaling factor beacon-like small cells with little more power than that corresponding to the same power spectral density for normal bandwidth small cell. Some embodiments reduce the interference caused by small cell to macrocell users using an adaptive bandwidth scaling factor for small cells based on number of users supported and their traffic demand, to control the extent of overlap the macrocell has with small cell and the interference to macrocell mobiles. Some embodiments utilize self-configuration for small cells utilizing flexible bandwidth channels.
摘要:
Systems, methods, devices, and computer program products are described for supporting macrocell-to-femtocell hand-ins of active macro communications for mobile access terminals. A femto-proxy system is provided including a femtocell and an out-of-band (OOB) proxy. While the femtocell may be addressed by the macro network according to a potentially non-unique identifier (e.g., its PN offset), the OOB proxy is addressable according to a unique OOB identifier (e.g., a Bluetooth device address, BD_ADDR). When the mobile access terminal is in proximity to the femto-proxy system, it detects the OOB proxy and communicates the unique OOB identifier to the core network via the macro network (e.g., as part of a measurement report). The OOB identifier is mapped (e.g., in the core network) to the femtocell, allowing the core network to uniquely identify the appropriate target femtocell for active hand-in.
摘要:
Page monitoring in a proxy relationship is optimized through creation of a new page occasion (PO) or paging frame (PF). The new PO/PF includes pages for each client-proxy relationship. Once the new PO/PF is communicated to the proxy, the proxy monitors for the pages of each client by monitoring a single PO/PF. Depending on the embodiment implemented, the network will either continue to also transmit pages during original PO or cease such transmission. On detection of a failed link between the proxy and client, the client may begin to monitor the original pages in such networks, or will begin monitoring using the new PO/PF until the network notifies the client that the state has changed.
摘要:
A method of providing signaling information for a wireless communication node includes: obtaining, at first user equipment (UE), first information associated with a first node of a first radio access technology (RAT) network that uses a first RAT, the first UE being configured for wireless telecommunication; and sending, in response to obtaining the first information, second information from the first UE to a second node of a second RAT network that uses a second RAT that is different from the first RAT.
摘要:
Techniques are provided to facilitate offloading of mobile entities from a serving network entity. For example, there is provided a location-based method that involves, in response to a load of the requesting entity exceeding a load threshold, identifying candidate network entities to which to offload a user equipment (UE), each of the candidate network entities being in sleep mode. The method may involve determining coverage and location information for the candidate network entities, and determining location information for the UE. The method may involve selecting a given network entity to turn ON based at least in part on the coverage information and the location information. The method may involve sending an ON-request message to the at least one selected network entity, the ON-request message including a timer that can be used to deactivate the selected network entity in case it is not useful in offloading the serving network entity.
摘要:
Methods, systems, and devices for utilizing flexible bandwidth carriers for small cells are provided. Bandwidth scaling factor(s) for a small cell may be determined. A flexible bandwidth carrier may be generated for the small cell utilizing the bandwidth scaling factor. Some embodiments provide assistance with active hand-in due to more available PN offsets in the flexible bandwidth domain. Some embodiments enhance small cell discovery with high bandwidth scaling factor beacon-like small cells with little more power than that corresponding to the same power spectral density for normal bandwidth small cell. Some embodiments reduce the interference caused by small cell to macrocell users using an adaptive bandwidth scaling factor for small cells based on number of users supported and their traffic demand, to control the extent of overlap the macrocell has with small cell and the interference to macrocell mobiles. Some embodiments utilize self-configuration for small cells utilizing flexible bandwidth channels.
摘要:
Methods, systems, and devices are disclosed for providing services, such as voice services, within flexible bandwidth systems. In general, the scaling of one or more aspects of a flexible bandwidth system may be compensated for through altering one or more aspects within a code domain. The tools and techniques may include scaling spreading factors (with rate matching tuning in some embodiments), multi-code transmission, code rate increases, AMR codec rate adjustments, and/or higher order modulation. Subframe decoding approaches for the reception scheme may also be utilized. These tools and techniques can be flexibly implemented on the mobile device and/or base station side. Some embodiments may also minimize the latency introduced by the transmission and/or reception process. Flexible bandwidths systems may utilize portions of spectrum that may be too big or too small to fit a normal bandwidth waveform.
摘要:
Methods, systems, and devices for separating signaling data and traffic data onto separate carriers for wireless communications systems are provided. Some embodiments utilize flexible bandwidth that may utilize portions of spectrum that may not be big enough to fit a normal waveform through utilizing flexible waveforms. Flexible bandwidth systems may lead to reduced data rate on the signaling or other channels. Separating the signaling and the data traffic into different flexible bandwidth carriers so that assigned resources can be customized to different traffic patterns may address this issue. In some embodiments, the signaling data is received and/or transmitted over a first carrier separate from any other traffic data. For example, the signaling data may be received and/or transmitted over the first band carrier without any other traffic data. The traffic data and/or network data associated with the signaling data may be received and/or transmitted over a separate, second carrier.
摘要:
Various features are provided to improve communication performance and power conservation in a client terminal by relying on the assistance of a proxy device. For instance, rather than reporting channel measurements via a primary communication channel to a network, the client terminal may be adapted to perform (a) channel measurement feedback using out-of-band signaling via the proxy device and/or (b) active synchronization with assistance of a proxy device. In this manner, the client terminal may be able to disable or reduce power consumption over a primary communication interface for the primary communication channel while utilizing a secondary communication interface to communicate with the proxy device.