-
公开(公告)号：US6029434A
公开(公告)日：2000-02-29
申请号：US731764
申请日：1996-10-18
CPC分类号： A01F15/106 , A01F15/07 , A01F2015/078 , A01F2015/0795
摘要： A round baler has a pickup header that is wider than the baling chamber and its inlet so that over-width windrows can be picked up by the machine in spite of its relatively narrower chamber. In order to reduce the width of the crop stream for introduction into the chamber, the machine is provided with a pair of laterally spaced apart, axially aligned, transverse stub augers that engage opposite outboard margins of the stream and converge them inwardly toward the main body of the flow. At the point where the outboard materials are discharged into the central body of the stream, a stuffer mechanism takes control of the stream and charges the materials up into the baling chamber. The augers are driven in such a direction that their front portions rotate down and under the auger shafts so that the outboard crop materials are likewise fed down and under the augers as they are converged toward the center. The inwardly augered materials are released by the augers down at the operating level of the stuffer, contributing to positive, orderly flow of materials through this region and into the baling chamber.
摘要翻译： 圆形打包机具有比打包室及其入口更宽的拾取头，使得尽管其相对较窄的腔室可以由机器拾取超宽度的料堆。 为了减小用于引入室的作物流的宽度，机器设置有一对侧向间隔开的轴向对齐的横向短轴螺旋推运器，其与流的相对的外侧边缘接合并将其向内朝向主体 的流量。 在外部材料排放到流体的中心体内的时候，填充机构控制流动并将材料装入打包室。 螺旋推运器沿着这样的方向驱动，使得它们的前部向下旋转并且在螺旋钻轴下方，使得外侧作物材料在朝向中心会聚时同样被向下并在螺旋钻下方。 向内旋转的材料通过螺旋钻在填料的操作水平下向下释放，有助于材料通过该区域并进入打包室的正向有序流动。
-
公开(公告)号：US4998961A
公开(公告)日：1991-03-12
申请号：US492286
申请日：1990-02-28
IPC分类号： A01F15/14
CPC分类号： A01F15/141 , A01F2015/076
摘要： The baler has a twine monitoring assembly which generates a pulsating signal in response to twine being dispensed during bale wrapping operations. The twine is wrapped around the periphery of a monitor wheel and, during dispensing, the twine rotationally drives the wheel. As the wheel rotates, a magnet affixed to the wheel at a location adjacent the periphery thereof, travels past a stationary, magnetically operated, normally open switch thereby briefly closing the switch and temporarily turning on an indicator light until the magnet moves sufficiently far enough away from the switch. During wrapping of the bale, twine is rapidly dispensed, causing the wheel to rapidly rotate and as a consequence, causing the light to pulsate, indicating to the operator that twine is being dispensed.
摘要翻译： 打包机具有线束监测组件，其响应于在包裹操作期间分配的麻线而产生脉动信号。 缠绕缠绕在监视器轮的周围，并且在分配期间，马蹄形旋转地驱动车轮。 当车轮旋转时，在与其周边相邻的位置处固定到车轮的磁体经过固定的，磁力操作的常开开关，从而短暂地关闭开关并暂时打开指示灯，直到磁体足够远的距离移动 从开关。 在包裹包裹期间，纱线被迅速地分配，导致轮子迅速地旋转，结果导致光脉动，向操作者指示正在分配麻线。
-
3.发明授权
公开(公告)号：US6073550A
公开(公告)日：2000-06-13
申请号：US248424
申请日：1999-02-11
CPC分类号： A01F15/0883
摘要： The bale pusher mechanism of a round baler has a one-way safety breakaway latch between the push bar that engages the ejected bale and the actuator that operates the push bar. During the pushing stroke of the push bar, the latch cannot unlock, but during the return stroke if the push bar hangs up on the bale for any reason, the relief spring of the latch can yield to allow the push bar to disconnect itself from the actuator and remain engaged with the bale. As the baler is driven forwardly a short distance with the tailgate raised, the unlatched push bar rides harmlessly across the top surface of the bale until it completely clears the bale. In most cases the push bar will then easily relatch itself with the actuator by gravity.
摘要翻译： 圆形打捆机的捆包推动器机构具有与推出的捆包的推杆和操作推杆的致动器之间的单向安全分离闩锁。 在推杆的推动行程期间，闩锁不能解锁，但是在返回行程期间，如果推杆由于任何原因而悬挂在捆包上，则闩锁的释放弹簧可以屈服，以允许推杆从自身脱离 执行器，并保持与捆包。 随着打包机向后推开一段短距离，后挡板抬起，未锁定的推杆无害地穿过捆包的顶部表面，直到它完全清除捆包。 在大多数情况下，推杆将随着致动器重力轻松地重新固定。
-
公开(公告)号：US5193450A
公开(公告)日：1993-03-16
申请号：US811017
申请日：1991-12-20
申请人： J. Dale Anderson
发明人： J. Dale Anderson
IPC分类号： A01F15/07
CPC分类号： A01F15/07 , A01F2015/078 , A01F2015/0795
摘要： A transverse belt guide roll of the baler has its main cylindrical body portion provided with opposite end extremities which are spaced inwardly from the opposite sidewalls of the baler. Reduced diameter stub shafts project outwardly beyond the end extremities and into bearings supported by the sidewalls while the endmost belts along the roll have marginal edge portions which overhang the end extremities of the roll body to thereby eliminate a pinch point for loose residue between the belt edges and the surface of the roll body. Special annular components surrounding the otherwise exposed portions of the shaft ends serve as a shield to prevent the ingress of loose residue into the stub shafts for migration to the bearing assemblies. An alternative embodiment has the overhanging belt margins on one of the idler rolls carried by a vertically swingable belt control arm of the baler.
摘要翻译： 打包机的横向带导向辊具有其主圆柱体部分，其设置有相对的末端部分，其与打捆机的相对侧壁间隔开。 减径直径的短轴从外端突出到外端，并进入由侧壁支撑的轴承中，而沿着辊的最末端的带有边缘部分，该边缘部分突出于卷体的末端，从而消除了带边缘之间的松散残留物的夹点 和辊体的表面。 围绕轴端部的另外暴露部分的特殊环形部件用作屏蔽件，以防止松散残留物进入短轴以迁移到轴承组件。 替代实施例在打包机的垂直摆动皮带控制臂承载的惰辊之一上具有悬垂的皮带边缘。
-
公开(公告)号：US4663922A
公开(公告)日：1987-05-12
申请号：US851481
申请日：1986-04-14
CPC分类号： A01D41/16
摘要： Quick attachment of crop handling headers to harvesters employs one or more wedge locks, utilizing the mechanical forces thereof to, in turn, tightly and firmly wedge an elongated tongue portion of the header into mating relationship with a header-supporting channel member on the harvester. For fast and easy attachment and release, reciprocable wedge-like latches are jammed into corresponding keepers with progressively increased tightness through use of reciprocable latch shifters readily accessible to the operator at ground level exteriorly of the ends of the header support. An exceptionally strong joint is effected as the latches and their keepers jam the tongue into the channel member.
摘要翻译： 作物处理头部到收割机的快速附接使用一个或多个楔形锁，利用其机械力，紧紧地并且牢固地将楔头的细长的舌部楔入与收割机上的头部支撑通道构件的配合关系。 为了快速和容易的附接和释放，可往复运动的楔形闩锁通过使用容易接近的操作者在头部支撑件的端部外部的地面处可接近的往复式闩锁移位器而逐渐增加的紧固性而卡在相应的保持器中。 当闩锁及其保持器将舌头卡入通道构件时，会产生非常强的接头。
-
公开(公告)号：US6015016A
公开(公告)日：2000-01-18
申请号：US897471
申请日：1997-07-21
申请人： J. Dale Anderson , Don Fuqua
发明人： J. Dale Anderson , Don Fuqua
CPC分类号： A01B61/025
摘要： The connection aid takes the form of a spring-loaded stand that is attached to the tongue of an implement for cradling support of the driveline at or near the height of the power take-off shaft of the tractor when the implement is not connected to the tractor. The driveline and the power take-off shaft can be readily aligned and reconnected when the implement is to be hitched to the tractor by simply pushing down on the driveline against the spring-loading of the stand or by slightly lifting the driveline with the help of the spring-loading of the stand to the extent necessary. Once the driveline has been connected, the stand may be swung down out of the way and into a stowed position substantially recessed below the top surface of the tongue.
摘要翻译： 连接辅助装置采用弹簧支架的形式，当工具未连接到拖拉机的动力输出轴的高度处或附近时，其附接到工具的舌部，用于支撑传动系， 拖拉机。 传动系和动力输出轴可以很容易地对准和重新连接，当工具被挂在拖拉机上时，通过简单地向下推动传动系统抵抗支架的弹簧加载，或者借助于轻微的提升传动系 在必要的范围内支架的弹簧加载。 一旦已经连接了传动系统，支架可以向下摆动并进入基本上在舌头顶表面下方凹进的收起位置。
-
公开(公告)号：US5819516A
公开(公告)日：1998-10-13
申请号：US733758
申请日：1996-10-18
CPC分类号： A01F15/07 , A01F15/106
摘要： A pickup header (18) has upwardly arched, inversely U-shaped gauge wheel support arms (24,25) that secure the gauge wheels (22,23) to opposite ends of the pickup header (18). Each gauge wheel support arm (24,25) includes a first depending leg member (50) attached to the outboard side (46) of its gauge wheel (22,23) and a support section (52) that is attached proximal to the end of the pickup header (18). Each gauge wheel support arm (24,25) extends over the top of its gauge wheel (22,23) and attaches to the outboard side (46) of the gauge wheel (22,23), thus eliminating any "pinch-zones" between the gauge wheels and the pickup header.
摘要翻译： 拾取头（18）具有将测量轮（22,23）固定到拾取头（18）的相对端的向上拱形的相反U形的量规轮支撑臂（24,25）。 每个量规轮支撑臂（24,25）包括附接到其量轮（22,23）的外侧（46）的第一悬垂的腿部构件（50）和支撑部分（52），该支撑部分靠近端部 的拾取头（18）。 每个量规轮支撑臂（24,25）在其规轮（22,23）的顶部上延伸并且附接到量规轮（22,23）的外侧（46），从而消除任何“夹紧区” 在量规轮和拾取头之间。
-
公开(公告)号：US5136831A
公开(公告)日：1992-08-11
申请号：US639257
申请日：1991-01-09
IPC分类号： A01F15/07
CPC分类号： A01F15/0705
摘要： The baler has a "vertical" bale starting chamber in which the upward moving rear belts and the downwardly moving front belts cooperate to tumble and roll incoming material into a bale. When the bale reaches full size in the expanded chamber, the bale is lifted while still in its chamber to a wrapping station where it continues to spin as a binding wrapper is applied. During the lifting of the finished bale and subsequent application of the wrapper, fresh material entering the continuously moving baler is confined beneath the finished bale in a new starting chamber, whereupon the cycle is repeated. As the new bale grows, a discharge ramp becomes formed by certain stretches of the belts and rollers to gravitationally discharge the wrapped bale from the baler without stopping advancement of the machine.
摘要翻译： 打包机具有“垂直”捆包起始室，其中向上移动的后带和向下移动的前带合作以将进入的材料滚动并卷入捆包中。 当捆包在扩展的房间中达到全尺寸时，捆包在仍然在其室中被提升到包装站，在其上继续旋转，因为施加了捆绑包装。 在提升成品捆包和随后应用包装物时，进入连续移动的打包机的新鲜材料被限制在新的起始室内的成品包下面，于是重复该循环。 随着新捆包的增长，一定数量的皮带和辊子会形成一个排放斜坡，从而将包装的捆包从打包机重力排出，而不会停止机器的前进。
-
公开(公告)号：US5855167A
公开(公告)日：1999-01-05
申请号：US897819
申请日：1997-07-21
CPC分类号： A01F15/141 , A01F2015/143
摘要： A round baler having a wrapping apparatus for wrapping bales with twine includes a twine dispenser moveable generally between the sidewalls for dispensing at least one strand of twine around the bale. The wrapping apparatus includes a retractable twine guide for spacing the twine wrapped around the bale a certain distance from one of the sidewalls. The guide is shiftable into and out of an operating position, in which the guide engages and maintains the twine the distance from the one sidewall. The wrapping apparatus further includes a twine cutter for severing the twine at the end of each wrapping cycle. Power mechanism, such as a hydraulic cylinder, is provided for simultaneously operating the twine cutter and the twine guide.
摘要翻译： 具有用于用马捆包裹包装的包装设备的圆形打包机包括可以在侧壁之间移动的绞线分配器，用于分配围绕捆包的至少一条缠绕线。 包装装置包括可伸缩的缠绕导纱器，用于将缠绕在捆包周围的麻线与一个侧壁隔开一定距离。 引导件可移动进入和离开操作位置，在该操作位置，引导件接合并保持绳子与一个侧壁的距离。 包装设备还包括一个用于在每个包装周期结束时切断麻线的绞线机。 提供诸如液压缸的动力机构，用于同时操作绞线刀和线缆引导件。
-
公开(公告)号：US5816038A
公开(公告)日：1998-10-06
申请号：US731767
申请日：1996-10-18
申请人： J. Dale Anderson , Ferol S. Fell , Craig Pecenka
发明人： J. Dale Anderson , Ferol S. Fell , Craig Pecenka
CPC分类号： A01F15/141 , A01F2015/143
摘要： A round baler having a wrapping apparatus for wrapping bales with twine includes a twine dispenser moveable generally between the sidewalls for dispensing at least one strand of twine around the bale. The wrapping apparatus further includes a retractable twine guide for spacing the twine wrapped around the bale a certain distance from one of the sidewalls. The guide is shiftable into and out of an operating position, in which the guide engages and maintains the twine the distance from the one sidewall. The operating position of the twine guide is generally within or proximate to the path of inflowing crop material so that shifting of the guide out of the operating position minimizes interference with the flow of material and reduces accumulation of trash and material on the guide.
摘要翻译： 具有用于用马捆包裹包装的包装设备的圆形打包机包括可以在侧壁之间移动的绞线分配器，用于分配围绕捆包的至少一条缠绕线。 包装设备还包括可伸缩的缠绕导纱器，用于将缠绕在捆包周围的麻线与一个侧壁隔开一定距离。 引导件可移动进入和离开操作位置，在该操作位置，引导件接合并保持绳子与一个侧壁的距离。 绞线引导件的操作位置通常在流入的作物材料的路径内或附近，使得引导件从操作位置移位使得材料流动的干扰最小化并减少垃圾和材料在引导件上的堆积。
-
-
-
-
-
-
-
-
-
搜索结果
18 条记录 (耗时 0.015 秒)
