摘要:
To reduce an uplink interference in a network with a first base station of a large output and a second base station of a small output. Detecting the interference, the second base station urges the first base station to hand over a terminal causing it to the second base station. Multiple base stations and one or more terminals exist in this system, each terminal connects with one base station, and a serving base station is changed according to a communication state of each terminal. If the different second base station other than the first base station to which the terminal connects detects a large interference, the second base station will multicast transmit information for urging handover to the base stations except itself. The base station having received the information specifies a terminal giving the interference to the second base station, and makes it to be handed over thereto.
摘要:
A communication device includes pilot signal sending part and transmit power control part and holds a criterion value indicating target channel quality for mobile stations within the area covered by the base station. It creates quality data from reports from one or plural mobile stations, stores the quality data, creates a first representative value indicating average channel quality for the mobile station(s) from the stored quality data, and changes the transmit power depending on the result of comparison between the first representative value and the criterion value. It creates a second representative value indicating distribution of low channel quality from the stored quality data and updates the criterion value depending on the result of comparison between the second representative value and the criterion value.
摘要:
To reduce an uplink interference in a network with a first base station of a large output and a second base station of a small output. Detecting the interference, the second base station urges the first base station to hand over a terminal causing it to the second base station. Multiple base stations and one or more terminals exist in this system, each terminal connects with one base station, and a serving base station is changed according to a communication state of each terminal. If the different second base station other than the first base station to which the terminal connects detects a large interference, the second base station will multicast transmit information for urging handover to the base stations except itself. The base station having received the information specifies a terminal giving the interference to the second base station, and makes it to be handed over thereto.
摘要:
A non-terminated packet is transmitted, by utilizing a spatial layer responded with an ACK, which is assumed as a released layer. Alternatively, a non-terminated packet is transmitted by using a released layer and an original spatial layer in combination. Alternatively, a new packet is transmitted in a released layer by utilizating time till termination of transmission of a non-terminated packet. A wireless communication system effectively utilizing a released layer, a terminal and a base station.
摘要:
Provided is a wireless base station comprising: a power control unit, a reference information acquisition unit and a reference information storing unit, wherein the wireless base station comprises a first control signal receiving unit for receiving a first uplink control signal used by a mobile station connected to the wireless base station and for requesting the power control unit to control the transmission, and a second control signal receiving unit for receiving a second uplink control signal used by a mobile station connected to the neighbor base station and for requesting the power control unit to control the transmission power, and wherein the power control unit controls the transmission power of the downlink signal based on the request to control the transmission power from the first control signal receiving unit and the request to control the transmission power from the second control signal receiving unit.
摘要:
A femtocell base station collects the terminal distribution within the cell and selects terminals to represent the cell-center and the cell-edge from among the terminals within the cell. The femtocell base station also calculates maximum transmit power for the respective the cell-center and cell-edge terminals allowable by the macrocell base station. The femtocell base station sets the respective transmit power of the cell-center and the cell-edge in a range that will not exceed the maximum transmit power, adjusts the transmit power control parameter to allow control by the terminal at the power value that was set, and notifies the terminal. Communication with high throughput can in this way be attained for terminals in cells within the femtocell base station during uplink communications to the femtocell base station, and interference applied to the terminals in the macrocell base station can be suppressed.
摘要:
A cellular radio communication system includes a first mobile terminal, a base station that performs radio communication with first mobile terminals, a second mobile terminal, and a second base station that performs radio communication with second mobile terminals. In the downlink communication, the base station selects a high data rate mode when the radio interference from the base station to the second mobile terminals that are located close to an edge of a communication area of the second base station is small. The base station selects an interference mitigation mode in the downlink communication when the radio interference from the base station to the second mobile terminals that are located close to the edge of the communication area of the second base station is large. Thus, inter-cell interference control can be performed in collaboration with base stations in the radio communication system without having communication interface between the base stations.
摘要:
In a system of the present invention, the amount of cell-edge band is limited. In addition, the upper limit of the amount of cell-edge band in each cell is set for limiting the amount of cell-edge band based on the upper limit. The number of cell-edge MSs is also limited. In addition, the upper limit of the number of cell-edge MSs in each cell is set for limiting the number of cell-edge MSs based on the upper limit.
摘要:
A base station is connected to wired and wireless networks to send a call that is received from the wired network to the wireless network at a predetermined quality of service (QoS), select one or more combinations of a set of modulation and coding scheme, and a radio resource amount that are associated with a QoS set in a newly incoming call, determine the radio resource amount that is equal to or less than a amount of the unassigned radio resources, assign, to the newly incoming call, the combination that is associated with the determined radio resource amount and the QoS set in the newly incoming call, reduce the radio resources assigned to the ongoing call without changing the QoS, and assign, to the newly incoming call, an amount of radio resources released from the ongoing call and modulation and coding scheme associated with this released radio resource amount.
摘要:
The present invention provides a wireless communication system and a terminal. A base station includes means that notifies terminals of an intensity of a received interference power. The terminal includes means that controls a transmission power for transmitting data to the base station, which is one of base stations and to which data is to be transmitted, by referencing an intensity of interference power (OSI) notified from base stations to which data is not to be transmitted. The means that controls a transmission power calculates a decision value for increasing/decreasing the transmission power, wherein the decision value is variable according to the current transmission power of the terminal and propagation attenuations between the terminal and the base stations to which data is not to be transmitted, and variably controls the amount of transmission power increase/decrease according to the decision value for increasing/decreasing a transmission power.