摘要:
A method implemented in a wireless transmit/receive unit (WTRU) for transmitting a channel quality indication (CQI) report or other measurement report begins by receiving a trigger. A CQI report is transmitted to a handover target Node B until a stop condition is reached. The WTRU will stop transmitting CQI reports to the target Node B if the stop condition is reached. A WTRU configured to perform the method includes an antenna, a transmitter/receiver connected to the antenna, and a processor communicating with the transmitter/receiver, the processor configured to transmit the CQI report to the handover target Node B.
摘要:
A method and an apparatus for serving high speed downlink shared channel (HS-DSCH) cell change are disclosed. A wireless transmit/receive unit (WTRU) receives pre-configured serving cell information for a target cell. The WTRU reports a measurement report and starts monitoring a high speed shared control channel (HS-SCCH) on the target cell. The WTRU may receive an HS-SCCH order over the target cell and/or a radio resource control (RRC) reconfiguration message over a source cell indicating a serving HS-DSCH cell change to the target cell. The WTRU may act upon all information elements of the RRC reconfiguration message in case that the RRC reconfiguration message is received prior to the HS-SCCH order, and act upon the pre-configured serving cell information in case that the HS-SCCH order is received prior to the RRC reconfiguration message.
摘要:
A method and apparatus for cell update while in a Cell_FACH state are disclosed. After selecting a target cell, system information is read from the target cell including high speed downlink shared channel (HS-DSCH) common system information. A radio network temporary identity (RNTI) received in a source cell is cleared and a variable HS_DSCH_RECEPTION is set to TRUE. An HS-DSCH medium access control (MAC-hs) entity is configured based on the HS-DSCH common system information. High speed downlink packet access (HSDPA) transmission is then received in the target cell. A CELL UPDATE message is sent to notify of a cell change. The HSDPA transmission may be received using a common H-RNTI broadcast in the system information, a reserved H-RNTI as requested in a CELL UPDATE message, or a temporary identity which is a subset of a U-RNTI. The MAC-hs entity may be reset.
摘要:
A method and apparatus for segmenting medium access control (MAC) service data units (SDUs) creates enhanced MAC-es PDUs in the enhanced MAC-e/es sub-layer by concatenating MAC SDUs received from the logical channels. An enhanced transport format combination (E-TFC) selection entity controls the concatenation of MAC SDUs into enhanced MAC-es PDUs. When a MAC SDU is received that is too large to fit into a selected enhanced MAC-es PDU payload, a segmentation entity segments the MAC SDU such that the MAC SDU segment fills the remaining payload available in the selected enhanced MAC-es PDU. The enhanced MAC-es PDU is then assigned a transmission sequence number (TSN) and multiplexed with other enhanced MAC-es PDUs to create a single enhanced MAC-e PDU that is transmitted on the E-DCH in the next transmission time interval (TTI). A HARQ entity stores and, if necessary retransmits the enhanced MAC-e PDU when a transmission error occurs.
摘要:
A method and an apparatus is provided for terminating an enhanced random access channel (E-RACH) message in an E-RACH transmission. Triggers for terminating the E-RACH message are provided. The actions upon termination of the E-RACH messages are provided to release enhanced dedicated channel (E-DCH) resources while in cell forward access channel (CELL_FACH) state or transition to cell dedicated channel (CELL_DCH) state.
摘要:
A method and apparatus for serving high speed downlink shared channel (HS-DSCH) cell change are disclosed. A wireless transmit/receive unit (WTRU) sends a measurement report to a radio network controller (RNC) when a signal strength of a target cell approaches a signal strength of a source cell. The RNC adds the target cell in an active set and sends pre-loaded HS-DSCH configuration information for the target cell to the WTRU. The WTRU sends another measurement report when a signal strength of the target cell exceeds that of the source cell. The WTRU monitors a high speed shared control channel (HS-SCCH) on the target cell based on the pre-loaded HS-DSCH configuration information and decodes an HS-SCCH transmission. The WTRU determines whether a MAC-hs/ehs reset is required and if so resets a MAC-hs/ehs entity prior to receiving an HS-DSCH transmission from the target cell.
摘要:
A method and apparatus for selecting an enhanced dedicated channel (E-DCH) transport format combination (E-TFC) in Cell_FACH state and idle mode are disclosed. A wireless transmit/receive unit (WTRU) transmits a random access channel (RACH) preamble and receives an index to an E-DCH resource in response to the RACH preamble. The WTRU may estimate a power headroom based on the maximum WTRU transmit power, power offset value, and the last successfully transmitted RACH preamble transmit power. The WTRU restricts an E-TFC based on the estimated power headroom, and selects an E-TFC based on a set of supported E-TFCs. The WTRU then generates, and transmits, a protocol data unit (PDU) based on the selected E-TFC.
摘要:
A method and apparatus are used to generate radio link control (RLC) protocol data units (PDUs). A data request for a logical channel is received as part of an enhanced dedicated channel (E-DCH) transport format combination (E-TFC) selection procedure in a medium access control (MAC). Upon determining the data field size, an RLC PDU is generated such that it matches the requested data from the E-TFC selection. The size of the RLC PDU generated can be greater than or equal to the minimum configured RLC PDU size (if data is available) and less than or equal to the maximum RLC PDU size. The data is then transmitted in the RLC PDU in a current transmission time interval (TTI).
摘要:
A wireless transmit/receive unit (WTRU) reports a buffer status as part of scheduling information for enhanced dedicated channel (E-DCH) transmissions. For reporting the buffer status, the WTRU calculates a total amount of data available across all logical channels for which reporting is requested by a radio resource control (RRC) entity. The total amount of data includes an amount of data that is available for transmission and retransmission at a radio link control (RLC) entity and an amount of data that is available for transmission in a medium access control for enhanced dedicated channel (MAC-i/is) segmentation entity in case that a MAC-i/is entity is configured. The WTRU sends scheduling information including a total E-DCH buffer status (TEBS) field that is set based on the total amount of data.
摘要:
An apparatus and method of transmitting a circuit switched (CS) voice application via an enhanced dedicated channel (E-DCH), implemented in a wireless transmit/receive unit (WTRU). The method includes receiving a grant; performing an E-TFC selection procedure based on the grant, wherein a number of bits that may be transmitted over an enhanced dedicated channel (E-DCH) is determined, determining an adaptive multi-rate (AMR) codec bit-rate based on the number of bits that may be transmitted over the E-DCH, generating AMR voice packets based on the determined AMR codec bit rate, and submitting the AMR voice packets to lower layers for transmission over the E-DCH.