Abstract:
Systems and methodologies are described that facilitate unified, low-complexity processing (e.g., user separation and noise estimation) of a control channel. One or more UEs can respectively transmit one or more control signals, which are multiplexed on a control channel and a base station can receive a control channel signal that includes the one or more control signals. The base station, in a single pass, can separate the control signals by matching the control channel signal with a base sequence and translating the matched signal to a time-domain representation. In the time-domain representation, each control signal resides at a different tap. Further, the base station can identify taps of the time-domain representation corresponding to an unused cyclic shift or orthogonal cover sequence. Such taps can be employed to generate a noise and/or interference estimate.
Abstract:
Techniques for supporting peer-to-peer (P2P) communication and wide area network (WAN) communication are disclosed. In one aspect, a method operable by a network entity to facilitate peer-to-peer (P2P) communication in a wireless network includes designating a first group of subframes in a wide area network (WAN) uplink (UL) spectrum for WAN communication. The method includes designating a second group of subframes in the WAN UL spectrum for P2P communication. The method further includes allowing P2P mobile entities to use WAN physical layer channels in the second group of subframes to communicate P2P control information and P2P data.
Abstract:
Techniques for performing network-assisted peer discovery to enable peer-to-peer (P2P) communication are described. In one design, a device registers with a network entity (e.g., a directory agent) so that the presence of the device and possibly other information about the device can be made known to the network entity. The network entity collects similar information from other devices. The device sends a request to the network entity, e.g., during or after registration. The request includes information used to match the device with other devices, e.g., information about service(s) provided by the device and/or service(s) requested by the device. The directory agent matches requests received from all devices, determines a match between the device and at least one other device, and sends a notification to perform peer discovery. The device performs peer discovery in response to receiving the notification from the network entity.
Abstract:
Aspects are described for reducing interference in wireless systems. In a first embodiment, an uplink acknowledgment region associated with a macro cell is determined, and an assignment of uplink control resources is restricted to a region within the uplink acknowledgment region. A control signal is then transmitted to user equipment via the assignment of uplink control resources. In another embodiment, control signals are received from wireless terminals, which include desired uplink control signals associated with an access point base station, as well as interfering uplink acknowledgement signals associated with macro cells. The control signals may then be regenerated by cancelling the set of interfering signals from the control signals. The desired uplink control signals are then decoded.
Abstract:
Systems and methodologies are described that facilitate unified, low-complexity processing (e.g., user separation and noise estimation) of a control channel. One or more UEs can respectively transmit one or more control signals, which are multiplexed on a control channel and a base station can receive a control channel signal that includes the one or more control signals. The base station, in a single pass, can separate the control signals by matching the control channel signal with a base sequence and translating the matched signal to a time-domain representation. In the time-domain representation, each control signal resides at a different tap. Further, the base station can identify taps of the time-domain representation corresponding to an unused cyclic shift or orthogonal cover sequence. Such taps can be employed to generate a noise and/or interference estimate.
Abstract:
Methods, systems, and devices for wireless communications are described. In some systems (e.g., non-orthogonal multiple access (NOMA) systems), a base station may serve a large number of user equipments (UEs) on the uplink. To improve detectability for these uplink transmissions (e.g., if reference signals are not available for the transmissions), the UEs may implement parallel transmissions of preambles with uplink data. A UE may split the uplink data into one or more data layers, and may select one or more preamble layers to transmit superposed with the data layers. These preambles may be sequences known to both the UE and the base station to aid in detectability. The UE may assign different signature sequences to each of these layers based on cross-correlation values (e.g., assigning sequences with higher cross-correlation values to the data layers for improved detectability), and may scramble the layers into a single shared signal for transmission.
Abstract:
Certain aspects relate to techniques for z-axis rotation estimation for compensating signaling transmitted between two or more nodes over a wireless channel where an antenna array of at least one of the nodes is misaligned about the z-axis relative to another node. For example, a transmitting node may transmit pilot signals defined by phase shifts to provide a receiving node with a basis for estimating the angle of rotation by which the antenna arrays are misaligned. The transmitting node may then take remedial action to address the misalignment based on the estimation.
Abstract:
Methods, systems, and devices for wireless communication are described. A wireless device may transmit feedback, such as hybrid automatic repeat request (HARQ) feedback for groups of code blocks rather than for an entire transport block or individual code blocks. The wireless device may transmit an acknowledgement (ACK) or negative-acknowledgement (NACK) to provide feedback for each code block group of a set of code block groups. An ACK may indicate that code blocks in a code block group were successfully decoded, and a NACK may indicate that at least one code block in a code block group was not successfully decoded. Wireless devices may support several techniques for grouping code blocks for feedback reporting to allow for efficient retransmissions and limited overhead. Different grouping schemes may be employed depending on system constraints, device capability, link conditions, or the like.
Abstract:
Methods, systems, and devices for wireless communications are described. A user equipment (UE) may receive, from a network entity, one or more control messages that indicate a configuration for a first downlink bandwidth part (BWP) associated with a first operating mode of the UE, a second downlink BWP associated with a second operating mode of the UE, a first set of resources within the first downlink BWP, and a second set of resources within the second downlink BWP. At least a portion of the configuration may correspond to a capability of the UE. The UE may monitor the first set of resources while in the first operating mode, and may monitor the second set of resources while in the second operating mode. The UE may receive a system information update or a public warning system (PWS) notification from the network entity via the second set of resources.
Abstract:
Aspects of the present disclosure provide techniques for uplink (UL) data channel design. An example method is provided for operations which may be performed by a first apparatus. The example method generally comprises determining a number of pilot symbols to transmit for one or more slots of a first subframe based, at least in part, on a coverage enhancement (CE) level, and transmitting at least one uplink data channel having the determined number of pilot symbols in the one or more slots of the first subframe.