Abstract:
A power conversion circuit of two feedback loops is disclosed that includes a feedback control circuit for ramping up or down a commanded voltage to a load (e.g., LEDs). The second feedback loop feeds into the first feedback loop, and the second feedback loop operates at a slower bandwidth than the first feedback loop. When ramping up or down the commanded voltage, a voltage overshoot results because of delay in the system. The overshoot can be compensated for by a final adjustment to the commanded voltage.
Abstract:
A power conversion circuit of two feedback loops is disclosed that includes a feedback control circuit for ramping up or down a commanded voltage to a load (e.g., LEDs). The second feedback loop feeds into the first feedback loop, and the second feedback loop operates at a slower bandwidth than the first feedback loop. When ramping up or down the commanded voltage, a voltage overshoot results because of delay in the system. The overshoot can be compensated for by a final adjustment to the commanded voltage.
Abstract:
A primary side PFC driver circuit is disclosed that includes a switch control circuit for commanding a switch to allow an inductor coupled to an output load (e.g., LEDs) to transfer energy provided by an input voltage source. The switch control circuit provides two signals for commanding the switch. A first signal having a first frequency, with a duty cycle in proportion to the input voltage amplitude, commands the switch to allow the average input current to be proportional to the input voltage amplitude. A second signal having a second frequency higher than the first frequency pulses the output load with substantially constant current pulses based on a value of the first signal (e.g., while the first signal is high). The current pulses produce a substantially constant current in the output load.
Abstract:
The disclosed implementations utilize the voltage drop inherent in the device string to power a device control IC. In some implementations, current is drawn from the bottom of the device string and applied to a voltage supply pin of the device control IC. In some implementations, current is drawn from some other location in the device string (e.g., near the bottom or midpoint of the device string) using a switch. In some implementations, current is drawn from near the bottom and the bottom of the device string at different times, such that less current is drawn from the bottom of the device string as the duty cycle of the device string increases and more current is drawn from near the bottom of the device string as the duty cycle of the device string increases.
Abstract:
A color correcting device driver is configured to vary the equivalent current into light emitting elements (e.g., LEDs) with the frequency of the AC input current (e.g., 120 Hz). In implementations that include a fly-back controller with a power factor correction (PFC) controller on the primary side, the color correcting device driver performs the method of: 1) turning on the loads (e.g., white and CA strings of LEDs); 2) determining if the voltage supplied to the loads has dropped by a first threshold amount; 3) turning off the loads; and 4) determining if the voltage supplied to loads has recovered by a second threshold amount (or waiting for a fixed amount of time). The method is repeated. In implementations that do not include a PFC controller on the primary side, the color correcting device driver can create a pulse width modulated (PWM) signal.
Abstract:
Embodiments disclosed herein describe a solar panel protection and control system. The system can bypass the solar panel under hazardous conditions or under command. The system can also help a solar panel array to reach its maximum power point in operation.
Abstract:
A primary side PFC driver circuit is disclosed that includes a switch control circuit for commanding a switch to allow an inductor coupled to an output load (e.g., LEDs) to transfer energy provided by an input voltage source. The switch control circuit provides two signals for commanding the switch. A first signal having a first frequency, with a duty cycle in proportion to the input voltage amplitude, commands the switch to allow the average input current to be proportional to the input voltage amplitude. A second signal having a second frequency higher than the first frequency pulses the output load with substantially constant current pulses based on a value of the first signal (e.g., while the first signal is high). The current pulses produce a substantially constant current in the output load.
Abstract:
A primary side PFC driver circuit is disclosed that includes a switch control circuit for commanding a switch to allow an inductor coupled to an output load (e.g., LEDs) to transfer energy provided by an input voltage source. The switch control circuit provides two signals for commanding the switch. A first signal having a first frequency, with a duty cycle in proportion to the input voltage amplitude, commands the switch to allow the average input current to be proportional to the input voltage amplitude. A second signal having a second frequency higher than the first frequency pulses the output load with substantially constant current pulses based on a value of the first signal (e.g., while the first signal is high). The current pulses produce a substantially constant current in the output load.
Abstract:
Embodiments disclosed herein describe a multi-dimensional code storage and transfer system. The system gets electrical power from the flash light of a typical smart device, and displays a time-varying multi-dimensional code which can be captured and decoded by the smart device. The system can be made by printed electronics technology.
Abstract:
The disclosed implementations utilize the voltage drop inherent in the device string to power a device control IC. In some implementations, current is drawn from the bottom of the device string and applied to a voltage supply pin of the device control IC. In some implementations, current is drawn from some other location in the device string (e.g., near the bottom or midpoint of the device string) using a switch. In some implementations, current is drawn from near the bottom and the bottom of the device string at different times, such that less current is drawn from the bottom of the device string as the duty cycle of the device string increases and more current is drawn from near the bottom of the device string as the duty cycle of the device string increases.