摘要:
A method and apparatus for handshaking using a 2-wire protocol is described. An electronic component may be divided into blocks, with the blocks performing one or more functions. The blocks may be in series with one another to form a pipeline. The blocks may use interface circuitry to transfer information upstream from or downstream to another block. The interface circuitry uses the 2-wire handshaking for the transfer including a transmit readiness wire configured to carry a signal indicative of readiness of the upstream circuit to output data and a receive readiness wire configured to carry a signal indicative of readiness of the downstream circuit to receive the data.
摘要:
A catheter assembly for an intravascular ultrasound system includes a catheter, an imaging core, and a shield-coupling capacitor. The catheter defines a lumen extending along a longitudinal length of the catheter. The imaging core is configured and arranged for inserting into the lumen. The imaging core includes a rotatable driveshaft, one or more transducers, one or more conductors, and a conductive shield. The one or more transducers are mounted to the rotatable driveshaft. The one or more conductors are coupled to the one or more transducers and extend along the driveshaft. The conductive shield is disposed around the one or more conductors. The shield-coupling capacitor is electrically coupled to the conductive shield and includes one or more rotating capacitors. The one or more rotating capacitors include one or more rotating plates and one or more stationary plates. The shield-coupling capacitor is configured and arranged for coupling to a system ground.
摘要:
The clipping diodes used to limit voltage during medical diagnostic ultrasound imaging operation are used during calibration operation for measuring amplitude and phase differences. The amplitude and phase measurements using clipping diodes as the calibration node may operate at any frequency, including frequencies less than 20 megahertz as well as frequencies above 20 megahertz. By using the diodes already present, a smaller or more compact calibration system may be provided. More simplistic integration may also result.
摘要:
A test method for an ASIC uses an embedded processor in the ASIC to execute test routines from an embedded memory or an external memory. During ASIC production, the test routines can comprehensively test of the blocks of the ASIC without a complicated test pattern from test equipment. The test routines can also perform power-up tests in systems or end products containing the ASIC. Test selection, activation, and result output can be implement using a few terminals of the ASIC.
摘要:
A test method for an ASIC uses an embedded processor in the ASIC to execute test routines from an embedded memory or an external memory. During ASIC production, the test routines can comprehensively test of the blocks of the ASIC without a complicated test pattern from test equipment. The test routines can also perform power-up tests in systems or end products containing the ASIC. Test selection, activation, and result output can be implement using a few terminals of the ASIC.
摘要:
A laser print apparatus includes a memory for storing a multi-bit image including a plurality of pixels. Each pixel is represented by an N-bit value, wherein N is greater than one. A modulation code generator analyzes three adjacent pixels. The three adjacent pixels include a left pixel, a center pixel, and a right pixel. The modulation code generator is configured to generate a pulse width value based on the value of the center pixel, and a justification value based on the values of the left pixel and the right pixel. A laser print engine forms an output pixel on media based on the pulse width value and the justification value.
摘要:
A test method for an ASIC uses an embedded processor in the ASIC to execute test routines from an embedded memory or an external memory. During ASIC production, the test routines can comprehensively test of the blocks of the ASIC without a complicated test pattern from test equipment. The test routines can also perform power-up tests in systems or end products containing the ASIC. Test selection, activation, and result output can be implement using a few terminals of the ASIC.
摘要:
A connector is provided for preventing damage to contacts between components of an electrical system which is particularly useful when electrical energy is stored in at least one of the components. The connector includes a mechanically operated latching member for activating and deactivating an electrical interface between the components. In one embodiment, a sensor determines when the connector is being disconnected from one of the components and provides a signal used by one of the components for disabling a power source providing the energy. In another embodiment, the sensor derived disconnect signal controls dissipating the stored energy away from the contacts between the components before the contacts are physically disengaged.
摘要:
A system and method for processing digital images that efficiently buffers pixel data relating to digital images is disclosed. Pixel values are read from an image storage memory and temporarily stored in a buffer memory according to a non-raster pattern. The processing of pixels also occurs according to a more efficient non-raster pattern.
摘要:
A test method for an ASIC uses an embedded processor in the ASIC to execute test routines from an embedded memory or an external memory. During ASIC production, the test routines can comprehensively test of the blocks of the ASIC without a complicated test pattern from test equipment. The test routines can also perform power-up tests in systems or end products containing the ASIC. Test selection, activation, and result output can be implement using a few terminals of the ASIC.