Abstract:
A method is provided for recording, with a magnetic resonance device, magnetic resonance data of a target region of a patient moved by their breathing. An optical camera arranged in a bore of the magnetic resonance device directed onto the patient is used. Image data of the patient recorded by the camera before and/or during the recording of the magnetic resonance data is evaluated to form breathing information describing the breathing state and the breathing information is used for triggering and/or movement correction and/or assessment of a process in which a patient holds their breath.
Abstract:
A method for setting a MRI sequence, a magnetic resonance device, and a computer program product are provided. The method includes providing, by a limitation unit, at least one limitation; providing, by a parameter provision unit, a plurality of parameters of the sequence, wherein at least one parameter of the plurality of parameters is assigned to a default parameter value; selecting, by a selection unit, a parameter of the plurality of parameters; determining, by a simulation unit, at least one sequential pattern based on at least one default parameter value of the default parameter values; determining, by an analysis unit, a permissible range of parameter values of the selected parameter based on at least one sequential pattern and the at least one limitation; and establishing, by an establishment unit, a new parameter value of the selected parameter within the permissible range of the parameter values.
Abstract:
In a method and magnetic resonance system to determine a flow coding for a flow measurement with the magnetic resonance system, in order to determine the optimal flow coding, a flow pre-measurement with multiple different flow codings is conducted within a slice within a body to be examined, each of these codings allowing flow velocities to be detected with a sensitivity dependent on the respective coding. A velocity distribution of the non-slice-location-specific flow velocity values is generated from all of the results of this flow pre-measurement by a common Fourier transformation. The optimal flow coding for the flow measurement is then determined based on this velocity distribution.
Abstract:
A method for performing motion compensation in a series of magnetic resonance (MR) images includes acquiring a set of MR image frames spanning different points along an MR recovery curve. A motion-free synthetic image is generated for each of the acquired MR image frames using prior knowledge pertaining to an MR recovery curve. Each of the acquired MR images is registered to its corresponding generated synthetic images. Motion within each of the acquired MR image is corrected based on its corresponding generated synthetic image that has been registered thereto.
Abstract:
In a method and apparatus for MR imaging, a data acquisition sequence is executed wherein at least two slices of an examination subject are imaged in parallel with a gradient echo method for spatially resolved quantification of the T1 relaxation time. At least one first acquisition sequence is implemented to acquire MR data from a first slice of the examination subject and at least one second acquisition sequence is implemented to acquire MR data from a second slice of the examination subject. The acquisition sequences each include an inversion pulse and at least two successive readout steps. The first and second acquisition sequences are temporally offset from one another such that they at least partially overlap.
Abstract:
In a method for optimization of a flow coding with switching of an additional bipolar dephasing gradient pair, used in a magnetic resonance (MR) phase contrast angiography, the strength of the flow coding is selected depending on the flow velocity in the vessels that should be depicted. MR signals of an examination region are acquired with continuously running overview measurements, with an operator-selected flow coding strength. After the selected flow coding strength is adopted automatically for the next measurement of the continuously running overview measurements, and two partial measurements with different flow codings are implemented for each selected strength and a phase difference image from the two partial measurements is calculated and depicted in real time, and the selected flow coding strength is automatically adopted for the MR phase contrast angiography.
Abstract:
In a method and magnetic resonance apparatus to acquire and present calibration images of a periodically moving organ with the use of magnetic resonance technology, calibration images are acquired by acquiring measurement data for multiple calibration images during one continuous period of the organ movement, the multiple calibration images differing in their offset frequency and/or in their spatial position in the organ to be examined, and the calibration images in a presentation manner that, from the visual quality of the respective images, allows the user to select (identify) the image acquired with the offset frequency that should then be used to acquire the diagnostic image are displayed to a user.
Abstract:
In a method of a magnetic resonance system and a method and computer-readable storage medium for the operation thereof to acquire magnetic resonance image data of an examination subject, wherein magnetic resonance system has a number of subsystems and a control device, a number of adjustment measurements to adjust at least one subsystem for making a medical diagnostic data acquisition are implemented through the control device. In these adjustment measurements, an adjustment volume associated with the appertaining adjustment measurement is taken into account that encompasses at least one region of a body containing the examination subject. For this purpose, markings established by the control device within image data of the examination subject and characterizing the spatial occupation (position and orientation) and/or a dimension of the examination subject are determined. Based on these markings the spatial occupation and extent of an adjustment volume for an adjustment measurement are determined automatically by the control device.
Abstract:
In a method for flow measurement with a magnetic resonance system and a correspondingly designed magnetic resonance system angiography measurement data of a volume are obtained within a body to be examined, a vessel is determined depending on a user input by means of the angiography measurement data, dimensions and an orientation of the vessel are automatically determined from the angiography measurement data, a slice geometry for the flow measurement is automatically determined depending on the dimensions and the orientation, and the flow measurement is implemented using the slice geometry.
Abstract:
A method for determining an item of positioning information for ECG electrodes during an examination with a magnetic resonance facility is provided. An image data record of a region surrounding the heart of a patient and the electrodes arranged on the surface of the patient is recorded. A position of the longitudinal heart axis and a position of the electrodes in the image data record are determined. A target position suited to determining evaluable ECG signals is automatically calculated for each of the electrodes by considering the position of the longitudinal heart axis and a displacement from the position of the electrodes to the target position. An item of positioning information for the electrodes is displayed by taking the displacements into consideration.A clean copy of the abstract that incorporates the above amendments is provided herewith on a separate page.